- Home
- Manufacturer
- Panasonic Corporation
Signal Relays, Up to 2 Amps
Panasonic Corporation- Signal Relays, Up to 2 Amps
Signal Relays, Up to 2 Amps - 型号列表
2,359 parts in total| Mfr Part # | Quantity Available | Price | Factory Pack Quantity | RoHS | Coil Type | Coil Current | Voltage - Supply | Current Rating (Max) | Power - Average Forward | Contact Rating (Current) | Packaging | Contact Form | Termination Style | Release Time | Coil Resistance | Switching Voltage | Contact Rating @ Voltage | Mounting Type | Contact Material | Operate Time | Operating Temperature | Product Category | Vce(on) (Max) @ Vge, Ic | Contact Layout, Typical | Standard Package | Isolation | Coil Power | Insertion Loss | Type | Relay Type | Current | Function | Card Standard | Voltage - Rated | Current - Switching | Voltage - Breakdown | Contact Voltage (Max) | Insulation Resistance | Current Rating - Parallel | Temperature | Mechanical Life | Shock Resistance | Vibration Resistance | Storage/Refrigeration Temperature | Contact Resistance | Weight | Features | Electrical Life | Voltage - Input (Min) | Varistor Voltage (Min) | Voltage Dropout (Max) | Vgs(th) (Max) @ Id | Voltage - Protection Level (VP) (2416) | Td (on/off) @ 25degC | Power - Output | Voltage - Nominal | DC contacts rating (at resistance load) | Tariff No | Current - Max/Contact | Voltage - Supply (Vcc/Vdd) | Varistor Voltage (Max) | Reset Time | Current Rating - Series | Current Rating (Per Contact) | Reset Operation | EU RoHS | Rad Hardened | Coil Voltage | Power - Rated | Visible Output | Voltage Rating | Pushing (MHz/V) | Voltage - Clamping | Voltage - Rated AC | Diode Configuration | Voltage - DC Reverse (Vr) (Max) | High Side Voltage - Max (Bootstrap) | Voltage - Rated AC (Phase to Ground/Neutral) | Seal | Depth | Height | Mounting Style | Length - Overall | Number of Contacts | Number of Positions | Push-to-Test |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 6-1393792-6 PED:51SHZG=D2 N TAIDEC BRAND Low Signal Relays - PCB PED:51SHZG=D2 N TAIDEC BRAND te connectivity / p&b | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Low Signal Relays - PCB | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
 TX2SS-12V-Z Low Signal Relays - PCB 2 Form C 2A 30VDC 12VDC RELAY TELECOM DPDT 2A 12V Electromechanical Relay DPDT 2A 12VDC 1.028KOhm Surface Mount Signal Relay Coil Voltage: 48 VDC Contact Configuration: 2C DPDT Current: 2 Amps Mounting: SMD Operating Function: Single Side Stable Panasonic Electric Works | 260 | 1: ¥29.648 | 500 | RoHS Compliant | Single Side Stable | 11.7 mA | 12 VDC | 2 A | 140 mW | 2 A | Reel | 2 Form C (DPDT-BM) | Solder Pad | 4ms | 1.03 kOhms | 220VDC - Max | 2 A at 30 VDC | Surface Mount | Silver (Ag), Gold (Au) | 4ms | -40°C ~ 85°C | Low Signal Relays - PCB | 9 VDC | 2C DPDT | 500 | 20 dB at 1 GHz | 140 mW | 0.8 dB at 1 GHz | Relays | Telecom | 2 Amps | Single Side Stable | Signal Relay | 57.6 VDC | 10 ?A 10 mV DC | 1,000 Vrms for 1 min. (Detection current: 10 mA) | 2,000 Vrms for 1 min. (Detection current: 10 mA) | Min. 10,000M ohm (at 500V DC) | 2 A 30 V DC | Max. 50°C | 10^8 | Min. 750 m/s^2{75G] | 294 m/s^2 {30G}, 10 to 55 Hz at double amplitude of 5 mm | 5 to 85% R.H. | 100 mohm | Approx. 2 g .071 oz | Sealed - Fully | 2 A 30 V DC resistive - 10^5, 1 A 30 V DC resistive - 510^5 | - | 1,500 V (FCC Part 68) | - | 1.2 VDC | - | - | - | - | - | - | - | - | 36 VDC | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 TQ2SA-L2-6V-X Low Signal Relays - PCB RELAY LATCH 2A 6VDC LOW PROFILE SMD Electromechanical Relay DPDT 2A 6VDC 257Ohm Surface Mount RELAY TELECOM DPDT 2A 6V Panasonic Electric Works | 194 | 1: ¥39.848 | 500 | RoHS Compliant | Latching, 2 Coils | 23.3 mA | 6 VDC | 2 A | 140 mW | 2 A | Reel | 2 Form C (DPDT-BM) | Solder Pad | * | * | * | 2 A at 30 VDC / 500 mA at 125 VAC | Surface Mount | * | * | * | - | 4.5 VDC | - | 500 | 20 dB at 1 GHz | * | 0.8 dB at 1 GHz | - | Telecom | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | * | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 TXD2SL-L-5V-X Low Signal Relays - PCB 2A 5VDC 150MW SMD RELAY LATCHING Electromechanical Relay DPDT 2A 5VDC 166Ohm Surface Mount Panasonic Electric Works | 171 | 1: ¥45.288 | 500 | RoHS Compliant | Single Latching | 30 mA | 5 VDC | 2 A | 150 mW | 2 A | Reel | 2 Form C (DPDT-BM) | Solder Pad | - | - | - | 2 A at 30 VDC | - | - | - | - | Low Signal Relays - PCB | - | - | - | 20 dB at 1 GHz | - | 0.8 dB at 1 GHz | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 TXS2SA-1.5V-X Low Signal Relays - PCB 1A 1.5VDC 50MW SMD RELAY Electromechanical Relay DPDT 1A 1.5VDC 45Ohm Surface Mount RELAY GEN PURPOSE DPDT 1A 1.5V Panasonic Electric Works | 208 | 1: ¥37.196 | 500 | RoHS Compliant | Single Side Stable | 33.3 mA | 1.5 VDC | 1 A | 50 mW | 1 A | Reel | 2 Form C (DPDT-BM) | Solder Pad | * | * | * | 1 A at 30 VDC | Surface Mount | * | * | * | Low Signal Relays - PCB | 1.2 VDC | - | 500 | 20 dB at 1 GHz | * | 0.8 dB at 1 GHz | - | General Purpose | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | * | - | - | - | - | 0.15 VDC | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 TK1-L-H-3V Low Signal Relays - PCB PCB TermTypeGld Cont 1 Form C 2A 30VDC RELAY GENERAL PURPOSE SPDT 2A 3V Electromechanical Relay SPDT 2A 3VDC 90Ohm Through Hole Signal Relay Coil Voltage: 3 VDC Contact Configuration: 1C SPDT Current: 2 Amps Mounting: PC Board Operating Function: 1 Coil Latching Panasonic Electric Works | 258 | 1: ¥29.036 | 50 | RoHS Compliant | Single Latching | 33.3 mA | 3 VDC | 2 A | 100 mW | 2 A | Tube | 1 Form C (SPDT-BM) | Quick Connect | 2ms | 90 Ohms | 220VDC - Max | 2 A at 30 VDC | Through Hole | Silver (Ag), Gold (Au) | 3ms | -40°C ~ 85°C | Low Signal Relays - PCB | 2.25 VDC | 1C SPDT | 50 | 20 dB at 1 GHz | 100 mW | 1.2 dB at 1 GHz | Relays | General Purpose | 2 Amps | 1 Coil Latching | Signal Relay | 4.5 VDC | 10 ?A 10 mV DC | 750 Vrms for 1 min. (Detection current: 10 mA) | 1,500 Vrms for 1 min. (Detection current: 10 mA) | Min. 1,000 Mohm (at 500 V DC) | 2 A 30 V DC | Max. 50°C | Obsolete | Min. 750 m/s^2 {75 G} | 294 m/s^2 {30G}, 10 to 55 Hz at double amplitude of 5 mm | 5 to 85% R.H. | 50 mohm | Approx. 1 g .035 oz. | Sealed - Fully | 2 A 30 V DC resistive - 10^5 | - | - | - | - | 2.25 VDC | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 TXS2SA-9V Low Signal Relays - PCB 2 Form C 2A 30VDC 9VDC RELAY GENERAL PURPOSE DPDT 1A 9V Low Signal Relays - PCB 2 Form C 1A 30VDC 9VDC Electromechanical Relay DPDT 1A 9VDC 1.62KOhm Surface Mount SIGNAL RELAY, DPDT, 9VDC, 1A, SMD Signal Relay Coil Voltage: 9 VDC Contact Configuration: 2C DPDT Current: 1 Amp Mounting: SMD Operating Function: Single Side Stable Panasonic Electric Works | 400 | 1: ¥27.744 | 40 | RoHS Compliant | Single Side Stable | 5.6 mA | 9 VDC | 1 A | 50 mW | 1 A | Tube | 2 Form C (DPDT-BM) | Solder Pad | 5ms | 1.62 kOhms | 110VDC - Max | 1 A at 30 VDC | Surface Mount | Silver (Ag), Gold (Au) | 5ms | -40°C ~ 70°C | Low Signal Relays - PCB | 7.2 VDC | :DPDT | 40 | 20 dB at 1 GHz | 50 mW | 0.8 dB at 1 GHz | - | General Purpose | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0 | Sealed - Fully | - | - | - | - | 0.9 VDC | - | - | - | - | - | 85364900 | :1A | :30V | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 TXD2SL-6V Low Signal Relays - PCB 2A 6VDC 200MW SMD RELAY Electromechanical Relay DPDT 2A 6VDC 180Ohm Surface Mount Signal Relay Coil Voltage: 6 VDC Contact Configuration: 2C DPDT Current: 2 Amps Mounting: SMD Operating Function: Single Side Stable Panasonic Electric Works | 277 | 1: ¥27.064 | 40 | RoHS Compliant | Single Side Stable | 33.3 mA | 6 VDC | 2 A | 200 mW | 2 A | Tube | 2 Form C (DPDT-BM) | Solder Pad | Max. 4 ms (Approx. 1 ms), [Max. 4 ms (Approx. 2 ms)] | 180 ohm | 220 V DC | 2 A at 30 VDC | SMD | Gold-clad silver | Max. 4 ms (Approx. 2 ms), [Max. 4 ms (Approx. 2 ms)] | 40°C to +85°C 40°F to +185°F | Low Signal Relays - PCB | - | 2C DPDT | - | 20 dB at 1 GHz | - | 0.8 dB at 1 GHz | Standard (B.B.M.) type | - | 2 Amps | Single Side Stable | Signal Relay | 7.2 VDC | 10 ?A 10 mV DC | 1,000 Vrms for 1 min. | 2,000 Vrms for 1 min. (Detection current: 10 mA) | Min. 10,000M ohm (at 500V DC) | 2 A 30 V DC | Max. 50°C | 10^8 | Min. 750 m/s^2{75G] | 10 to 55 Hz at double amplitude of 5 mm | 5 to 85% R.H. | 100 mohm | - | - | 105 (2 A 30 V DC resistive), 5 10^5 (1 A 30 V DC resistive) | 4.5 VDC | 2,500 V (Telcordia) | 0.6 VDC | - | - | n/a | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 TXS2SA-L-1.5V-Z Low Signal Relays - PCB 1A 1.5VDC 35MW SMD RELAY LATCHING Electromechanical Relay DPDT 1A 1.5VDC 64.3Ohm Surface Mount RELAY GEN PURPOSE DPDT 1A 1.5V Signal Relay Coil Voltage: 1.5 VDC Contact Configuration: 2C DPDT Current: 1 Amp Mounting: SMD Operating Function: 1 Coil Latching Panasonic Electric Works | 183 | 1: ¥42.296 | 500 | RoHS Compliant | Latching, 1 Coil | 23.3 mA | 1.5 VDC | 1 A | 35 mW | 1 A | Reel | 2 Form C (DPDT-BM) | Solder Pad | * | * | * | 1 A at 30 VDC | Surface Mount | * | * | * | Low Signal Relays - PCB | 1.2 VDC | 2C DPDT | 500 | 20 dB at 1 GHz | * | 0.8 dB at 1 GHz | Relays | General Purpose | 1 Amp | 1 Coil Latching | Signal Relay | 2.2 VDC | 10 ?A 10 mV DC | 1,000 Vrms for 1min. | 1,800 Vrms for 1min. | Min. 10,000M ohm (at 500V DC) | 1 A 30 V DC | Max. 50°C | 5x10^7 | Min. 750 m/s^2 {75 G} | 10 to 55 Hz at double amplitude of 5 mm | 5 to 85% R.H. | 100 mohm | Approx. 2 g .071 oz | * | 1 A 30 V DC resistive - 210^5 | 1.2 VDC | 2,500 V (Telcordia) | 0.15 VDC | - | - | - | - | - | - | - | - | - | - | Max. 5 ms (Approx. 1.5 ms) [Max. 5 ms (Approx. 3 ms)] | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 TQ2SL-5V-X Low Signal Relays - PCB RELAY 2A 5VDC LOW PROFILE SMD Electromechanical Relay DPDT 2A 5VDC 178Ohm Surface Mount RELAY TELECOM DPDT 2A 5V Panasonic Electric Works | 243 | 1: ¥31.756 | 500 | RoHS Compliant | Single Side Stable | 28.1 mA | 5 VDC | 2 A | 140 mW | 2 A | Reel | 2 Form C (DPDT-BM) | Solder Pad | * | * | * | 2 A at 30 VDC / 500 mA at 125 VAC | Surface Mount | * | * | * | - | 3.75 VDC | - | 500 | 20 dB at 1 GHz | * | 0.8 dB at 1 GHz | - | Telecom | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | * | - | - | - | - | 0.5 VDC | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 TQ2SS-6V-Z Low Signal Relays - PCB RELAY 2A 6VDC LOW PROFILE SMD Electromechanical Relay DPDT 2A 6VDC 257Ohm Surface Mount RELAY TELECOM DPDT 2A 6V Signal Relay Coil Voltage: 6 VDC Contact Configuration: 2C DPDT Current: 2 Amps Mounting: SMD Operating Function: Single Side Stable Panasonic Electric Works | 243 | 1: ¥31.756 | 500 | RoHS Compliant | Single Side Stable | 23.3 mA | 6 VDC | 2 A | 140 mW | 2 A | Reel | 2 Form C (DPDT-BM) | Solder Pad | * | * | * | 2 A at 30 VDC / 500 mA at 125 VAC | Surface Mount | * | * | * | - | 4.5 VDC | 2C DPDT | 500 | 20 dB at 1 GHz | * | 0.8 dB at 1 GHz | Relays | Telecom | 2 Amps | Single Side Stable | Signal Relay | 9 VDC | 10 ?A 10 mV DC | 1,500 Vrms for 1 min. (Detection current: 10 mA) | 1,500 Vrms for 1 min. (Detection current: 10 mA) | Min. 1,000 Mohm (at 500 V DC) | 2 A 30 V DC, 0.5 A 125 V AC | Max. 50°C | 10^8 | Min. 750 m/s^2 {75 G} | 294 m/s^2 {30G}, 10 to 55 Hz at double amplitude of 5 mm | 5 to 85% R.H. | 75 mohm | Approx. 2 g .071 oz | * | 2 A 30 V DC resistive - 10^5, 1 A 30 V DC resistive - 210^5, 0.5 A 125 V AC resistive - 10^5 | 4.5 VDC | 1,500 V (FCC Part 68) | 0.6 VDC | 0.6 VDC | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 ASX21003 Low Signal Relays - PCB 2 Form C, 3VDC 10mA 10VDC RELAY TELECOM DPDT 10MA 3V Electromechanical Relay DPDT 0.01A 3VDC 257Ohm Through Hole Signal Relay Coil Voltage: 3 VDC Contact Configuration: 2C DPDT Current: 10 mAmps Mounting: PC Board Operating Function: 1 Coil Latching Panasonic Electric Works | 77 | 1: ¥47.464 | 40 | RoHS Compliant | Single Latching | 11.7 mA | 3 VDC | 10 mA | 35 mW | 10 mA | Tube | 2 Form C (DPDT-BM) | Solder Terminal | 5ms | 64.3 Ohms | 10VDC - Max | 10 mA at 10 VDC | Through Hole | Silver Palladium (AgPd), Gold (Au) | 5ms | -40°C ~ 70°C | Low Signal Relays - PCB | 2.4 VDC | 2C DPDT | 40 | - | 35 mW | - | Relays | Telecom | 10 mAmps | 1 Coil Latching | Signal Relay | 4.5 VDC | 10 ?A 1 mVDC | 1,000 Vrms for 1min. | 1,000 Vrms for 1min. | Min. 10,000M ohm (at 500V DC) | 10 mA 10 VDC | Max. 50°C | End of Life: Scheduled for obsolescence and will be discontinued by the manufacturer. | Min. 750 m/s^2{75G] | 10 to 55 Hz at double amplitude of 5 mm | 5 to 85% R.H. | - | - | - | - | 2.4 VDC | - | 2.4 VDC | - | - | - | 0.1 W | 3 ?V | 10^7 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 ASX200A1H Low Signal Relays - PCB RELAY SWITCH 1.5VDC 10MA SMD Signal Relay Coil Voltage: 1.5 VDC Contact Configuration: 2C DPDT Current: 10 mAmps Mounting: SMD Operating Function: Single Side Stable Panasonic Electric Works | 10 | 1: ¥47.056 | 40 | RoHS Compliant | Single Side Stable | 33.3 mA | 1.5 VDC | 10 mA | 50 mW | 10 mA | Tube | 2 Form C (DPDT-BM) | Solder Terminal | Max. 5 ms (Approx. 1.5 ms), [Max. 5 ms (Approx. 3 ms)] | 45 ohm | 10 VDC | 10 mA at 10 VDC | SMD | Gold-clad silver alloy | Max. 5 ms (Approx. 3 ms), [Max. 5 ms (Approx. 3 ms)] | 40°C to 70°C, 40°F to 158°F | Low Signal Relays - PCB | - | 2C DPDT | - | - | - | - | Relays | - | 10 mAmps | Single Side Stable | Signal Relay | 2.25 VDC | 10 ?A 1 mVDC | 1,000 Vrms for 1min. | 1,000 Vrms for 1min. | Min. 10,000M ohm (at 500V DC) | 10 mA 10 VDC | Max. 50°C | End of Life: Scheduled for obsolescence and will be discontinued by the manufacturer. | Min. 750 m/s^2{75G] | 10 to 55 Hz at double amplitude of 5 mm | 5 to 85% R.H. | - | - | - | - | 1.2 VDC | - | 0.15 VDC | - | - | - | 0.1 W | 3 ?V | 10^7 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 TQ2SS-L-12V Low Signal Relays - PCB 2 Form C 12V 2A 30VDC 0.5A 125VAC RELAY TELECOM DPDT 2A 12V Electromechanical Relay DPDT 2A 12VDC 2.057KOhm Surface Mount Signal Relay Coil Voltage: 12 VDC Contact Configuration: 2C DPDT Current: 2 Amps Mounting: SMD Operating Function: 1 Coil Latching Panasonic Electric Works | 80 | 1: ¥27.88 | 50 | RoHS Compliant | Latching, 1 Coil | 5.8 mA | 12 VDC | 2 A | 70 mW | 2 A | Tube | 2 Form C (DPDT-BM) | Solder Pad | 4ms | 2.06 kOhms | 125VAC, 220VDC - Max | 2 A at 30 VDC / 500 mA at 125 VAC | Surface Mount | Silver Nickel (AgNi), Gold (Au) | 4ms | -40°C ~ 85°C | Low Signal Relays - PCB | 9 VDC | 2C DPDT | 50 | 20 dB at 1 GHz | 70 mW | 0.8 dB at 1 GHz | Relays | Telecom | 2 Amps | 1 Coil Latching | Signal Relay | 18 VDC | 10 ?A 10 mV DC | 1,500 Vrms for 1 min. (Detection current: 10 mA) | 1,500 Vrms for 1 min. (Detection current: 10 mA) | Min. 1,000 Mohm (at 500 V DC) | 2 A 30 V DC, 0.5 A 125 V AC | Max. 50°C | 10^8 | Min. 750 m/s^2 {75 G} | 294 m/s^2 {30G}, 10 to 55 Hz at double amplitude of 5 mm | 5 to 85% R.H. | 75 mohm | Approx. 2 g .071 oz | - | 2 A 30 V DC resistive - 10^5, 1 A 30 V DC resistive - 210^5, 0.5 A 125 V AC resistive - 10^5 | - | 1,500 V (FCC Part 68) | - | - | 9 VDC | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 ASX220A12 Low Signal Relays - PCB 2 Form C, 12VDC 10mA 10VDC RELAY TELECOM DPDT 10MA 12V Signal Relay Coil Voltage: 12 VDC Contact Configuration: 2C DPDT Current: 10 mAmps Mounting: SMD Operating Function: 2 Coil Latching Panasonic Electric Works | 50 | 1: ¥101.184 | 40 | RoHS Compliant | Dual Latching | 5.8 mA | 12 VDC | 10 mA | 70 mW | 10 mA | Tube | 2 Form C (DPDT-BM) | Solder Terminal | 5ms | 2.06 kOhms | 10VDC - Max | 10 mA at 10 VDC | Surface Mount | Silver Palladium (AgPd), Gold (Au) | 5ms | -40°C ~ 70°C | Low Signal Relays - PCB | 9.6 VDC | 2C DPDT | 40 | - | 70 mW | - | Relays | Telecom | 10 mAmps | 2 Coil Latching | Signal Relay | 18 VDC | 10 ?A 1 mVDC | 1,000 Vrms for 1min. | 1,000 Vrms for 1min. | Min. 10,000M ohm (at 500V DC) | 10 mA 10 VDC | Max. 50°C | End of Life: Scheduled for obsolescence and will be discontinued by the manufacturer. | Min. 750 m/s^2{75G] | 10 to 55 Hz at double amplitude of 5 mm | 5 to 85% R.H. | - | - | - | - | 9.6 VDC | - | 9.6 VDC | - | - | - | 0.1 W | 3 ?V | 10^7 | - | - | - | - | - | 5.8 mA | 5.8 mA | 70 mW | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 TQ4H-L-6V Low Signal Relays - PCB RELAY LATCH 1A 6VDC LOPRO CLNCH Signal Relay Coil Voltage: 6 VDC Contact Configuration: 4C 4PDT Current: 1 Amp Mounting: PC Board Operating Function: 1 Coil Latching Panasonic Electric Works | - | 25 | RoHS Compliant | Single Latching | 33.3 mA | 6 VDC | 1 A | 200 mW | 1 A | Tube | 4 Form C (4PDT-BM) | Quick Connect | Max. 3 ms (Approx. 1 ms) [Max. 3 ms (Approx. 2 ms)] | 180 ohm | 110 V DC, 125 V AC | 1 A at 30 VDC / 500 mA at 125 VAC | PC Board | Gold-clad silver alloy | Max. 3 ms (Approx. 2 ms) [Max. 3 ms (Approx. 2 ms)] | 40°C to +70°C, 40°F to +158°F | - | 4.5 VDC | 4C 4PDT | - | 15 dB at 1 GHz | - | 0.6 dB at 1 GHz | Standard (B.B.M.) type | - | 1 Amp | 1 Coil Latching | Signal Relay | 9 VDC | 10 ?A 10 mV DC | 1,000 Vrms for 1 min. (Detection current: 10 mA) | 1,000 Vrms for 1 min. (Detection current: 10 mA) | Min. 10,000M ohm (at 500V DC) | 1 A 30 V DC, 0.5 A 125 V AC | Max. 50°C | Obsolete | Min. 490 m/s^2 {50G} | 294 m/s2 {30G}, 10 to 55 Hz at double amplitude of 5 mm | 5 to 85% R.H. | 50 mohm | Approx. 3 g .106 oz. | - | 1 A 30 V DC resistive - 210^5, 0.5 A 125 V AC resistive - 10^5 | - | - | - | - | 4.5 VDC | n/a | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
 TX2-LT-4.5V Low Signal Relays - PCB 2 Form C 2A 30VDC 4.5VDC RELAY TELECOM DPDT 2A 4.5V High Capacity High Breakdown Voltage, 2 Form C, 2A 30VDC, PC Board Terminal Type, 2 Coil Latching (Alternate footprint), Gold Contact Panasonic Electric Works | 93 | 1: ¥18.156 | 40 | RoHS Compliant | Latching, 2 Coils | 44.5mA | 4.5 VDC | 2 A | 200 mW | 2A | Tube | 2 Form C (DPDT-BM) | PC Pin | 4ms | 101.2 Ohms | 220VDC - Max | - | Through Hole | Silver (Ag), Gold (Au) | 4ms | -40°C ~ 85°C | Low Signal Relays - PCB | 3.38 VDC | 2C DPDT | 40 | - | 200 mW | - | Relays | Telecom | 2 Amps | 2 Coil Latching | Signal Relay | - | - | - | - | - | - | - | - | - | - | - | - | - | Sealed - Fully | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 TQ2SS-L2-5V-Z Low Signal Relays - PCB RELAY LATCH 2A 5VDC LOW PROFILE SMD RELAY TELECOM DPDT 2A 5V Electromechanical Relay DPDT 2A 5VDC 178Ohm Surface Mount Signal Relay Coil Voltage: 5 VDC Contact Configuration: 2C DPDT Current: 2 Amps Mounting: SMD Operating Function: 2 Coil Latching Panasonic Electric Works | 185 | 1: ¥41.752 | 500 | RoHS Compliant | Latching, 2 Coils | 28.1 mA | 5 VDC | 2 A | 140 mW | 2 A | Reel | 2 Form C (DPDT-BM) | Solder Pad | 4ms | 178 Ohms | 125VAC, 220VDC - Max | 2 A at 30 VDC / 500 mA at 125 VAC | Surface Mount | Silver Nickel (AgNi), Gold (Au) | 4ms | -40°C ~ 85°C | - | 3.75 VDC | 2C DPDT | 500 | 20 dB at 1 GHz | 140 mW | 0.8 dB at 1 GHz | Relays | Telecom | 2 Amps | 2 Coil Latching | Signal Relay | 7.5 VDC | 10 ?A 10 mV DC | 1,500 Vrms for 1 min. (Detection current: 10 mA) | 1,500 Vrms for 1 min. (Detection current: 10 mA) | Min. 1,000 Mohm (at 500 V DC) | 2 A 30 V DC, 0.5 A 125 V AC | Max. 50°C | 10^8 | Min. 750 m/s^2 {75 G} | 294 m/s^2 {30G}, 10 to 55 Hz at double amplitude of 5 mm | 5 to 85% R.H. | 75 mohm | Approx. 2 g .071 oz | - | 2 A 30 V DC resistive - 10^5, 1 A 30 V DC resistive - 210^5, 0.5 A 125 V AC resistive - 10^5 | - | 1,500 V (FCC Part 68) | - | - | 3.75 VDC | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 AGN210A03 Low Signal Relays - PCB 1A 3VDC DPDT LATCHING SMD Electromechanical Relay DPDT 1A 3VDC 90Ohm Surface Mount RELAY TELECOM DPDT 1A 3V SIGNAL RELAY, DPDT, 3VDC, 1A, SMD AGN,GN,Relay,SMDAtype1-coillatch, Signal Relay Coil Voltage: 3 VDC Contact Configuration: 2C DPDT Current: 1 Amp Mounting: Surface Mount Operating Function: 1 Coil Latching Panasonic Electric Works | 325 | 1: ¥20.808 | 50 | RoHS Compliant By Exemption | Latching, 1 Coil | 33.3 mA | 3 VDC | 1 A | 100 mW | 1 A | Tube | 2 Form C (DPDT-BM) | Solder Pad | 4ms | 90 Ohms | 125VAC, 110VDC - Max | 1 A at 30 VDC / 300 mA at 125 VAC | Surface Mount | Silver Palladium | 4ms | -40°C ~ 85°C | Low Signal Relays - PCB | 2.25 VDC | DPDT | 50 | - | 100 mW | - | General Purpose Relay | Latching Single Coil | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0 | - | - | 125 | - | - | - | - | - | - | - | - | 85364110 | :1A | :30V | - | - | - | - | - | Compliant | No | 3V | 30W|37.5VA | No | 110 | No | 2.25VDC | 125V | No | 110V | 2.25VDC | :125V | Sealed | 7.4 mm | 10 mm | Surface Mount | 10.6 mm | 8 | 8 | No |
 TXD2-H-4.5V Low Signal Relays - PCB 2A 4.5VDC SELF CLNCH RELAY Signal Relay Coil Voltage: 4.5 VDC Contact Configuration: 2C DPDT Current: 2 Amps Mounting: PC Board Operating Function: Single Side Stable Panasonic Electric Works | 10 | 1: ¥31.892 | 40 | RoHS Compliant | Single Side Stable | 44.4 mA | 4.5 VDC | 2 A | 200 mW | 2 A | Tube | 2 Form C (DPDT-BM) | Quick Connect | Max. 4 ms (Approx. 1 ms), [Max. 4 ms (Approx. 2 ms)] | 101 ohm | 220 V DC | 2 A at 30 VDC | PC Board | Gold-clad silver | Max. 4 ms (Approx. 2 ms), [Max. 4 ms (Approx. 2 ms)] | 40°C to +85°C 40°F to +185°F | Low Signal Relays - PCB | - | 2C DPDT | - | 20 dB at 1 GHz | - | 0.8 dB at 1 GHz | Standard (B.B.M.) type | - | 2 Amps | Single Side Stable | Signal Relay | 5.4 VDC | 10 ?A 10 mV DC | 1,000 Vrms for 1 min. | 2,000 Vrms for 1 min. (Detection current: 10 mA) | Min. 10,000M ohm (at 500V DC) | 2 A 30 V DC | Max. 50°C | End of Life: Scheduled for obsolescence and will be discontinued by the manufacturer., Obsolete | Min. 750 m/s^2{75G] | 10 to 55 Hz at double amplitude of 5 mm | 5 to 85% R.H. | 100 mohm | - | - | 105 (2 A 30 V DC resistive), 5 10^5 (1 A 30 V DC resistive) | 3.38 VDC | 2,500 V (Telcordia) | 0.45 VDC | - | - | n/a | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |