- Home
- Manufacturer
- Schneider Electric SE
AC-DC Converters - Enclosed
Schneider Electric SE- AC-DC Converters - Enclosed
03
AC-DC Converters - Enclosed - 型号列表
115 parts in total| Mfr Part # | Quantity Available | Price | Voltage - Input (Min) | Standards | Compliance | Protection | Certification | Speed | Output | Data Rate | Interface | Linearity | Input Type | Output Signal | Response Time | Power - Output | Voltage Rating | Current - Output | Number of Inputs | Voltage - Supply | Number of Outputs | Power - Peak Pulse | Current - Switching | Frequency Tolerance | Voltage - Breakdown | Current Rating (Max) | Frequency - Output 1 | Frequency - Operating | Frequency - Switching | Insulation Resistance | Voltage Regulation - Load | Sampling Rate (Per Second) | Current - Peak Pulse (8/20us) | Current - Peak Pulse (10/1000us) | Width | Bend Radius | Acceleration | Connector Type | Mounting Style | Number of Positions | Torque - Max Momentary (oz-in / mNm) | Protocol | Label Type | Product Type | Connection Type | Measuring Range | Operating Position | Motor Type - AC, DC | Number of Addresses | Other Specifications | Application Specifics | For Use With/Related Products | Humidity Range | Shock Resistance | Storage Interface | Ingress Protection | Operating Pressure | Vibration Resistance | Operating Temperature | Noise | Accuracy | Isolation | Depth | Height | Cable Type | Polarization | Torque - Holding (oz-in / mNm) | Data Format | Card Standard | Power - Average Forward | Weight | Frequency Range | Supplier Device Package | Number of Inputs and Type | Operation | Power Dissipation (Max) | Frequency | Air Flow | Communications | Device Short Name | Filter Type | Power - Rated | Length - Overall | Series | File Type | Control Side Connection | Temperature | Variation Suffix | Primary Material | Type | Manufacturer | Configuration | Current - Output (Typ) | Constant Current Load - Max | Insulation | Number of Drivers | Protective Treatment |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | - | 120VAC | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | AC-DC | USB | UPASeries | Enclosed | - | - | - | - | - | |
 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
 ATV61HD30Y 施耐德(SCHNEIDER) 风泵变频器 Schneider Electric component ATV61HD30Y: variable speed drive ATV61 - 30kW / 690V - 30HP / 575V - IP20 施耐德 | - | 22 kA 3 phases | EN 55011 class A group 2EN 61800-3 environments 1 category C3EN 61800-3 environments 2 category C3EN/IEC 61800-3EN/IEC 61800-5-1IEC 60721-3-3 class 3C2UL Type 1 | Level 3 EMC filter | Drive against exceeding limit speedDrive against input phase lossDrive break on the control circuitDrive input phase breaksDrive line supply overvoltageDrive line supply undervoltageDrive overcurrent between output phases and earthDrive overheating protectionDrive overvoltages on the DC busDrive power removalDrive short-circuit between motor phasesDrive thermal protectionMotor motor phase breakMotor power removalMotor thermal protection | CSAC-TickDNVGOSTNOM 117UL | +/- 10 % of nominal slip for 0.2 Tn to Tn torque variation without speed feedback | (R1A, R1B, R1C) configurable relay logic NO/NC, electrical durability 100000 cycles(R2A, R2B) configurable relay logic NO, electrical durability 100000 cycles | 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus on terminal9600 bps, 19200 bps for Modbus on front face | 2-wire RS 485 for Modbus | AI1-/Al1+ +/- 0.15 % of maximum valueAI2 +/- 0.15 % of maximum valueAO1 +/- 0.2 % | AI1-/Al1+ bipolar differential voltage +/- 10 V DC, input voltage 24 V max, resolution 11 bits + signAI2 software-configurable current 0...20 mA, impedance 242 Ohm, resolution 11 bitsAI2 software-configurable voltage 0...10 V DC, input voltage 24 V max, impedance 30000 Ohm, resolution 11 bits | AO1 software-configurable current, analogue output range 0...20 mA, impedance 500 Ohm, resolution 10 bitsAO1 software-configurable logic output 10 V, <= 20 mAAO1 software-configurable voltage, analogue output range 0...10 V DC, impedance 470 Ohm, resolution 10 bits | <= 100 ms in STO (Safe Torque Off)R1A, R1B, R1C <= 7 ms, tolerance +/- 0.5 msR2A, R2B <= 7 ms, tolerance +/- 0.5 ms | 22 kW 3 phases at 500 V30 kW 3 phases at 690 V | <= power supply voltage | 28 A for 600 V 3 phases 22 kW / 30 hp33 A for 500 V 3 phases 22 kW / 30 hp34 A for 690 V 3 phases 22 kW / 30 hp | 2 | Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <= 10 mA for overload and short-circuit protectionInternal supply 24 V DC (21...27 V), <= 200 mA for overload and short-circuit protectionExternal supply 24 V DC (19...30 V), 30 W | 2 | 30 hp 3 phases at 575 V | Configurable relay logic 3 mA at 24 V DC | Analog input 0.024/50 HzDisplay unit 0.1 Hz | 3110 V DC between earth and power terminals5345 V DC between control and power terminals | R1, R2 on resistive load, 5 A at 250 V AC, cos phi = 1, L/R = 0 msR1, R2 on resistive load, 5 A at 30 V DC, cos phi = 1, L/R = 0 msR1, R2 on inductive load, 2 A at 250 V AC, cos phi = 0.4, L/R = 7 msR1, R2 on inductive load, 2 A at 30 V DC, cos phi = 0.4, L/R = 7 ms | 0.1...500 Hz | 4 kHz | 2.5...6 kHz adjustable4...6 kHz with derating factor | > 1 mOhm at 500 V DC for 1 minute to earth | Frequency PI regulator | Analog input AI1-/Al1+ 2 ms, +/- 0.5 msAnalog input Al2 2 ms, +/- 0.5 msAnalog output AO1 2 ms, +/- 0.5 msDiscrete input LI1...LI5 2 ms, +/- 0.5 msDiscrete input LI6 (if configured as logic input)2 ms, +/- 0.5 ms | 42 A for 60 s 3 phases | 130 % of nominal motor torque, +/- 10 % for 60 s | 240 mm | By DC injection | Automatic adaptation of ramp if braking capacity exceeded, by using resistorLinear adjustable separately from 0.01 to 9000 sS, U or customized | 1 RJ45 for Modbus on front face1 RJ45 for Modbus on terminalMale SUB-D 9 on RJ45 for CANopen | With heat sink | 3 phases | L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB 12 N.m / 102.2 lb.inAI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR 0.6 N.m | CANopenModbus | CE | Variable speed drive | RTU for Modbus | Altivar 61 | Vertical +/- 10 degree | AdjustableAutomatic whatever the loadCan be suppressedNot available in voltage/frequency ratio (2 or 5 points) | 1...247 for Modbus1...127 for CANopen | (LI1...LI5) programmable, 24 V DC, voltage limits <= 30 V, with level 1 PLC, impedance 3500 Ohm(LI6) switch-configurable, 24 V DC, voltage limits <= 30 V, with level 1 PLC, impedance 3500 Ohm(LI6) switch-configurable PTC probe, 0...6, impedance 1500 Ohm(PWR) safety input, 24 V DC, voltage limits <= 30 V, impedance 1500 Ohm | Pumping and ventilation machine | Asynchronous motorsSynchronous motors | 5...95 % without condensation conforming to IEC 60068-2-35...95 % without dripping water conforming to IEC 60068-2-3 | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 | -25...70 °C | IP20 on upper part without blanking plate on cover conforming to EN/IEC 60529IP20 on upper part without blanking plate on cover conforming to EN/IEC 61800-5-1IP21 conforming to EN/IEC 60529IP21 conforming to EN/IEC 61800-5-1IP41 on upper part conforming to EN/IEC 60529IP41 on upper part conforming to EN/IEC 61800-5-1IP54 on lower part conforming to EN/IEC 60529IP54 on lower part conforming to EN/IEC 61800-5-1 | <= 1000 m without derating1000...2260 m with current derating 1 % per 100 m | 1.5 mm peak to peak (f = 3...13 Hz) conforming to EN/IEC 60068-2-61 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-6 | -10...50 °C without derating50...60 °C with derating factor | 59.9 dB conforming to 86/188/EEC | AI1-/Al1+ +/- 0.6 % for a temperature variation 60 °CAI2 +/- 0.6 % for a temperature variation 60 °CAO1 +/- 1 % for a temperature variation 60 °C | Between power and control terminals | 236 mm | 420 mm | With an IP21 or an IP31 kit: 3-strand IEC cable at 40 °C, copper 70 °C PVCWith UL Type 1 kit: 3-strand UL 508 cable at 40 °C, copper 75 °C PVCWithout mounting kit: 1-strand IEC cable at 45 °C, copper 70 °C PVCWithout mounting kit: 1-strand IEC cable at 45 °C, copper 90 °C XLPE/EPR | No impedance for Modbus | +/- 15 % in open-loop mode, without speed feedback | 8 bits, 1 stop, even parity for Modbus on front face8 bits, odd even or no configurable parity for Modbus on terminal | APOGEE FLN communication cardBACnet communication cardCC-Link communication cardController inside programmable cardDeviceNet communication cardEthernet/IP communication cardFipio communication cardI/O extension cardInterbus-S communication cardLonWorks communication cardMETASYS N2 communication cardModbus Plus communication cardModbus TCP communication cardModbus/Uni-Telway communication cardMulti-pump cardProfibus DP communication cardProfibus DP V1 communication card | - | 30 kg | 47.5...63 Hz | ATV61 | 7 | Slave for CANopen | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
 ATV61HD55Y 施耐德(SCHNEIDER) 风泵变频器 Schneider Electric component ATV61HD55Y: variable speed drive ATV61 - 55kW / 690V - 60HP / 575V - IP20 施耐德 | - | 22 kA 3 phases | EN 55011 class A group 2EN 61800-3 environments 1 category C3EN 61800-3 environments 2 category C3EN/IEC 61800-3EN/IEC 61800-5-1IEC 60721-3-3 class 3C2UL Type 1 | Level 3 EMC filter | Drive against exceeding limit speedDrive against input phase lossDrive break on the control circuitDrive input phase breaksDrive line supply overvoltageDrive line supply undervoltageDrive overcurrent between output phases and earthDrive overheating protectionDrive overvoltages on the DC busDrive power removalDrive short-circuit between motor phasesDrive thermal protectionMotor motor phase breakMotor power removalMotor thermal protection | CSAC-TickDNVGOSTNOM 117UL | +/- 10 % of nominal slip for 0.2 Tn to Tn torque variation without speed feedback | (R1A, R1B, R1C) configurable relay logic NO/NC, electrical durability 100000 cycles(R2A, R2B) configurable relay logic NO, electrical durability 100000 cycles | 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus on terminal9600 bps, 19200 bps for Modbus on front face | 2-wire RS 485 for Modbus | AI1-/Al1+ +/- 0.15 % of maximum valueAI2 +/- 0.15 % of maximum valueAO1 +/- 0.2 % | AI1-/Al1+ bipolar differential voltage +/- 10 V DC, input voltage 24 V max, resolution 11 bits + signAI2 software-configurable current 0...20 mA, impedance 242 Ohm, resolution 11 bitsAI2 software-configurable voltage 0...10 V DC, input voltage 24 V max, impedance 30000 Ohm, resolution 11 bits | AO1 software-configurable current, analogue output range 0...20 mA, impedance 500 Ohm, resolution 10 bitsAO1 software-configurable logic output 10 V, <= 20 mAAO1 software-configurable voltage, analogue output range 0...10 V DC, impedance 470 Ohm, resolution 10 bits | <= 100 ms in STO (Safe Torque Off)R1A, R1B, R1C <= 7 ms, tolerance +/- 0.5 msR2A, R2B <= 7 ms, tolerance +/- 0.5 ms | 45 kW 3 phases at 500 V55 kW 3 phases at 690 V | <= power supply voltage | 57 A for 600 V 3 phases 45 kW / 60 hp63 A for 690 V 3 phases 45 kW / 60 hp68 A for 500 V 3 phases 45 kW / 60 hp | 2 | Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <= 10 mA for overload and short-circuit protectionInternal supply 24 V DC (21...27 V), <= 200 mA for overload and short-circuit protectionExternal supply 24 V DC (19...30 V), 30 W | 2 | 60 hp 3 phases at 575 V | Configurable relay logic 3 mA at 24 V DC | Analog input 0.024/50 HzDisplay unit 0.1 Hz | 3110 V DC between earth and power terminals5345 V DC between control and power terminals | R1, R2 on resistive load, 5 A at 250 V AC, cos phi = 1, L/R = 0 msR1, R2 on resistive load, 5 A at 30 V DC, cos phi = 1, L/R = 0 msR1, R2 on inductive load, 2 A at 250 V AC, cos phi = 0.4, L/R = 7 msR1, R2 on inductive load, 2 A at 30 V DC, cos phi = 0.4, L/R = 7 ms | 0.1...500 Hz | 2.5 kHz | 2.5...4.9 kHz adjustable2.5...4.9 kHz with derating factor | > 1 mOhm at 500 V DC for 1 minute to earth | Frequency PI regulator | Analog input AI1-/Al1+ 2 ms, +/- 0.5 msAnalog input Al2 2 ms, +/- 0.5 msAnalog output AO1 2 ms, +/- 0.5 msDiscrete input LI1...LI5 2 ms, +/- 0.5 msDiscrete input LI6 (if configured as logic input)2 ms, +/- 0.5 ms | 81.6 A for 60 s 3 phases | 130 % of nominal motor torque, +/- 10 % for 60 s | 320 mm | By DC injection | Automatic adaptation of ramp if braking capacity exceeded, by using resistorLinear adjustable separately from 0.01 to 9000 sS, U or customized | 1 RJ45 for Modbus on front face1 RJ45 for Modbus on terminalMale SUB-D 9 on RJ45 for CANopen | With heat sink | 3 phases | L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB 41 N.m / 360 lb.inAI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR 0.6 N.m | CANopenModbus | CE | Variable speed drive | RTU for Modbus | Altivar 61 | Vertical +/- 10 degree | AdjustableAutomatic whatever the loadCan be suppressedNot available in voltage/frequency ratio (2 or 5 points) | 1...247 for Modbus1...127 for CANopen | (LI1...LI5) programmable, 24 V DC, voltage limits <= 30 V, with level 1 PLC, impedance 3500 Ohm(LI6) switch-configurable, 24 V DC, voltage limits <= 30 V, with level 1 PLC, impedance 3500 Ohm(LI6) switch-configurable PTC probe, 0...6, impedance 1500 Ohm(PWR) safety input, 24 V DC, voltage limits <= 30 V, impedance 1500 Ohm | Pumping and ventilation machine | Asynchronous motorsSynchronous motors | 5...95 % without condensation conforming to IEC 60068-2-35...95 % without dripping water conforming to IEC 60068-2-3 | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 | -25...70 °C | IP20 on upper part without blanking plate on cover conforming to EN/IEC 60529IP20 on upper part without blanking plate on cover conforming to EN/IEC 61800-5-1IP21 conforming to EN/IEC 60529IP21 conforming to EN/IEC 61800-5-1IP41 on upper part conforming to EN/IEC 60529IP41 on upper part conforming to EN/IEC 61800-5-1IP54 on lower part conforming to EN/IEC 60529IP54 on lower part conforming to EN/IEC 61800-5-1 | <= 1000 m without derating1000...2260 m with current derating 1 % per 100 m | 1.5 mm peak to peak (f = 3...13 Hz) conforming to EN/IEC 60068-2-61 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-6 | -10...50 °C without derating50...60 °C with derating factor | 63.7 dB conforming to 86/188/EEC | AI1-/Al1+ +/- 0.6 % for a temperature variation 60 °CAI2 +/- 0.6 % for a temperature variation 60 °CAO1 +/- 1 % for a temperature variation 60 °C | Between power and control terminals | 290 mm | 630 mm | With an IP21 or an IP31 kit: 3-strand IEC cable at 40 °C, copper 70 °C PVCWith UL Type 1 kit: 3-strand UL 508 cable at 40 °C, copper 75 °C PVCWithout mounting kit: 1-strand IEC cable at 45 °C, copper 70 °C PVCWithout mounting kit: 1-strand IEC cable at 45 °C, copper 90 °C XLPE/EPR | No impedance for Modbus | +/- 15 % in open-loop mode, without speed feedback | 8 bits, 1 stop, even parity for Modbus on front face8 bits, odd even or no configurable parity for Modbus on terminal | APOGEE FLN communication cardBACnet communication cardCC-Link communication cardController inside programmable cardDeviceNet communication cardEthernet/IP communication cardFipio communication cardI/O extension cardInterbus-S communication cardLonWorks communication cardMETASYS N2 communication cardModbus Plus communication cardModbus TCP communication cardModbus/Uni-Telway communication cardMulti-pump cardProfibus DP communication cardProfibus DP V1 communication card | - | 68 kg | 47.5...63 Hz | ATV61 | 7 | Slave for CANopen | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
 ATV61WU75N4 施耐德(SCHNEIDER) 风泵变频器 Schneider Electric component ATV61WU75N4: variable speed drive ATV61 - 7.5kW 10HP - 380...480V - EMC filter - IP54 施耐德 | - | 22 kA 3 phases | EN 55011 class A group 1EN 61800-3 environments 1 category C2EN 61800-3 environments 2 category C2EN/IEC 61800-3EN/IEC 61800-5-1IEC 60721-3-3 class 3C1IEC 60721-3-3 class 3S2UL Type 12 | Class C2 EMC filter integrated | Drive against exceeding limit speedDrive against input phase lossDrive break on the control circuitDrive input phase breaksDrive line supply overvoltageDrive line supply undervoltageDrive overcurrent between output phases and earthDrive overheating protectionDrive overvoltages on the DC busDrive power removalDrive short-circuit between motor phasesDrive thermal protectionMotor motor phase breakMotor power removalMotor thermal protection | CSAC-TickDNVGOSTNOM 117UL | +/- 10 % of nominal slip for 0.2 Tn to Tn torque variation without speed feedback | (R1A, R1B, R1C) configurable relay logic NO/NC, electrical durability 100000 cycles(R2A, R2B) configurable relay logic NO, electrical durability 100000 cycles | 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus on terminal9600 bps, 19200 bps for Modbus on front face | 2-wire RS 485 for Modbus | AI1-/Al1+ +/- 0.15 % of maximum valueAI2 +/- 0.15 % of maximum valueAO1 +/- 0.2 % | AI1-/Al1+ bipolar differential voltage +/- 10 V DC, input voltage 24 V max, resolution 11 bits + signAI2 software-configurable current 0...20 mA, impedance 242 Ohm, resolution 11 bitsAI2 software-configurable voltage 0...10 V DC, input voltage 24 V max, impedance 30000 Ohm, resolution 11 bits | AO1 software-configurable current, analogue output range 0...20 mA, impedance 500 Ohm, resolution 10 bitsAO1 software-configurable logic output 10 V, <= 20 mAAO1 software-configurable voltage, analogue output range 0...10 V DC, impedance 470 Ohm, resolution 10 bits | <= 100 ms in STO (Safe Torque Off)R1A, R1B, R1C <= 7 ms, tolerance +/- 0.5 msR2A, R2B <= 7 ms, tolerance +/- 0.5 ms | 7.5 kW 3 phases at 380...480 V | <= power supply voltage | 13.3 A for 480 V 3 phases 7.5 kW / 10 hp15.8 A for 380 V 3 phases 7.5 kW / 10 hp | 2 | Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <= 10 mA for overload and short-circuit protectionInternal supply 24 V DC (21...27 V), <= 200 mA for overload and short-circuit protectionExternal supply 24 V DC (19...30 V), 30 W | 2 | 10 hp 3 phases at 380...480 V | Configurable relay logic 3 mA at 24 V DC | Analog input 0.024/50 HzDisplay unit 0.1 Hz | 3535 V DC between earth and power terminals5092 V DC between control and power terminals | R1, R2 on resistive load, 5 A at 250 V AC, cos phi = 1, L/R = 0 msR1, R2 on resistive load, 5 A at 30 V DC, cos phi = 1, L/R = 0 msR1, R2 on inductive load, 2 A at 250 V AC, cos phi = 0.4, L/R = 7 msR1, R2 on inductive load, 2 A at 30 V DC, cos phi = 0.4, L/R = 7 ms | 0.1...500 Hz | 8 kHz | 2...16 kHz adjustable8...16 kHz with derating factor | > 1 mOhm at 500 V DC for 1 minute to earth | Frequency PI regulator | Analog input AI1-/Al1+ 2 ms, +/- 0.5 msAnalog input Al2 2 ms, +/- 0.5 msAnalog output AO1 2 ms, +/- 0.5 msDiscrete input LI1...LI5 2 ms, +/- 0.5 msDiscrete input LI6 (if configured as logic input)2 ms, +/- 0.5 ms | 17.6 A for 60 s 3 phases | 130 % of nominal motor torque, +/- 10 % for 60 s | 260 mm | By DC injection | Automatic adaptation of ramp if braking capacity exceeded, by using resistorLinear adjustable separately from 0.01 to 9000 sS, U or customized | 1 RJ45 for Modbus on front face1 RJ45 for Modbus on terminalMale SUB-D 9 on RJ45 for CANopen | Enclosed | 3 phases | L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB 3 N.m / 26.5 lb.inAI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR 0.6 N.m | CANopenModbus | CE | Variable speed drive | RTU for Modbus | Altivar 61 | Vertical +/- 10 degree | AdjustableAutomatic whatever the loadCan be suppressedNot available in voltage/frequency ratio (2 or 5 points) | 1...247 for Modbus1...127 for CANopen | (LI1...LI5) programmable, 24 V DC, voltage limits <= 30 V, with level 1 PLC, impedance 3500 Ohm(LI6) switch-configurable, 24 V DC, voltage limits <= 30 V, with level 1 PLC, impedance 3500 Ohm(LI6) switch-configurable PTC probe, 0...6, impedance 1500 Ohm(PWR) safety input, 24 V DC, voltage limits <= 30 V, impedance 1500 Ohm | Pumping and ventilation machine | Asynchronous motorsSynchronous motors | 5...95 % without condensation conforming to IEC 60068-2-35...95 % without dripping water conforming to IEC 60068-2-3 | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 | -25...70 °C | IP54 conforming to EN/IEC 61800-5-1IP54 conforming to UL Type 12IP54 conforming to EN/IEC 60529 | <= 1000 m without derating1000...3000 m with current derating 1 % per 100 m | 1.5 mm peak to peak (f = 3...13 Hz) conforming to EN/IEC 60068-2-61 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-6 | -10...40 °C without derating-10...50 °C with derating factor | 55.6 dB conforming to 86/188/EEC | AI1-/Al1+ +/- 0.6 % for a temperature variation 60 °CAI2 +/- 0.6 % for a temperature variation 60 °CAO1 +/- 1 % for a temperature variation 60 °C | Between power and control terminals | 286 mm | 525 mm | With an IP21 or an IP31 kit: 3-strand IEC cable at 40 °C, copper 70 °C PVCWith UL Type 1 kit: 3-strand UL 508 cable at 40 °C, copper 75 °C PVCWithout mounting kit: 1-strand IEC cable at 45 °C, copper 70 °C PVCWithout mounting kit: 1-strand IEC cable at 45 °C, copper 90 °C XLPE/EPR | No impedance for Modbus | +/- 15 % in open-loop mode, without speed feedback | 8 bits, 1 stop, even parity for Modbus on front face8 bits, odd even or no configurable parity for Modbus on terminal | APOGEE FLN communication cardBACnet communication cardCC-Link communication cardController inside programmable cardDeviceNet communication cardEthernet/IP communication cardFipio communication cardI/O extension cardInterbus-S communication cardLonWorks communication cardMETASYS N2 communication cardModbus Plus communication cardModbus TCP communication cardModbus/Uni-Telway communication cardMulti-pump cardProfibus DP communication cardProfibus DP V1 communication card | 10.4 kVA for 380 V 3 phases 7.5 kW / 10 hp | 22 kg | 47.5...63 Hz | ATV61 | 7 | Slave for CANopen | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
 ATV212HD22N4 施耐德(SCHNEIDER) 风泵变频器 Schneider Electric component ATV212HD22N4: variable speed drive ATV212 - 22kW - 30hp - 480V - 3ph - EMC - IP21 施耐德 | - | 22 kA | EN 55011 class A group 1EN 61800-3EN 61800-3 category C2EN 61800-3 category C3EN 61800-3 environments 1 category C1EN 61800-3 environments 1 category C2EN 61800-3 environments 1 category C3EN 61800-3 environments 2 category C1EN 61800-3 environments 2 category C2EN 61800-3 environments 2 category C3EN 61800-5-1IEC 61800-3IEC 61800-3 category C2IEC 61800-3 category C3IEC 61800-3 environments 1 category C1IEC 61800-3 environments 1 category C2IEC 61800-3 environments 1 category C3IEC 61800-3 environments 2 category C1IEC 61800-3 environments 2 category C2IEC 61800-3 environments 2 category C3IEC 61800-5-1UL Type 1 | Class C2 EMC filter integrated | Overheating protection for driveShort-circuit between motor phases for driveOvercurrent between output phases and earth for driveOvervoltages on the DC bus for driveBreak on the control circuit for driveAgainst exceeding limit speed for driveLine supply undervoltage for driveAgainst input phase loss for driveThermal protection for motorMotor phase break for motorInput phase breaks for driveThermal power stage for driveLine supply overvoltage and undervoltage for driveWith PTC probes for motor | CSAC-TickNOM 117UL | +/- 10 % of nominal slip for 0.2 Tn to Tn torque variation | Configurable relay logic: (FLA, FLC) NO - 100000 cyclesConfigurable relay logic: (FLB, FLC) NC - 100000 cyclesConfigurable relay logic: (RY, RC) NO - 100000 cycles | 9600 bps or 19200 bps | 2-wire RS 485 | +/- 0.15 % of maximum value for input (VIA)+/- 0.15 % of maximum value for input (VIB)+/- 0.2 % for output (FM) | Switch-configurable voltage: (VIA) 0...10 V DC - 24 V max - 30000 Ohm - resolution: 10 bitsSwitch-configurable current: (VIA) 0...20 mA - 250 Ohm - resolution: 10 bitsConfigurable voltage: (VIB) 0...10 V DC - 24 V max - 30000 Ohm - resolution: 10 bitsConfigurable PTC probe: (VIB) 0...6 probes - 1500 Ohm | Switch-configurable voltage: (FM) 0...10 V DC - 7620 Ohm - resolution: 10 bitsSwitch-configurable current: (FM) 0...20 mA - 970 Ohm - resolution: 10 bits | 2 ms +/- 0.5 ms (FM) - analog output(s)7 ms +/- 0.5 ms (FLA, FLC) - discrete output(s)7 ms +/- 0.5 ms (FLB, FLC) - discrete output(s)7 ms +/- 0.5 ms (RY, RC) - discrete output(s) | 22 kW | <= power supply voltage | 33.1 A for 480 V41.6 A for 380 V | 2 | Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC, +/- 5 % - <= 10 A with overload and short-circuit protectionInternal supply: 24 V (21...27 V) DC - <= 200 A with overload and short-circuit protection | 2 | 30 hp | 3 mA at 24 V DC (configurable relay logic) | 0.1 Hz for display unit0.024/50 Hz for analog input | 3535 V DC between earth and power terminals5092 V DC between control and power terminals | 5 A at 250 V AC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R)5 A at 30 V DC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R)2 A at 250 V AC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R)2 A at 30 V DC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R) | 0.5...200 Hz | 8 kHz | 6...16 kHz adjustable8...16 kHz with derating factor | >= 1 MOhm at 500 V DC for 1 minute | Adjustable PI regulator | 2 ms +/- 0.5 ms (F) - discrete input(s)2 ms +/- 0.5 ms (R) - discrete input(s)2 ms +/- 0.5 ms (RES) - discrete input(s)3.5 ms +/- 0.5 ms (VIA) - analog input(s)22 ms +/- 0.5 ms (VIB) - analog input(s) | 47.9 A for 60 s | 120 % of nominal motor torque, +/- 10 % for 60 s | 240 mm | By DC injection | Automatic based on the loadLinear adjustable separately from 0.01 to 3200 s | 1 RJ451 open style | With heat sink | 3 phases | 0.6 N.m (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)24 N.m - 212 lb.in (L1/R, L2/S, L3/T) | APOGEE FLNBACnetLonWorksMETASYS N2Modbus | CE | Variable speed drive | RTU | Altivar 212 | Vertical +/- 10 degree | AdjustableAutomatic whatever the loadNot available in voltage/frequency ratio motor control | 1...247 | Programmable (F) 24 V DC, with level 1 PLC - 4700 OhmProgrammable (R) 24 V DC, with level 1 PLC - 4700 OhmProgrammable (RES) 24 V DC, with level 1 PLC - 4700 Ohm | Pumps and fans in HVAC | Asynchronous motors | 5...95 % without condensation conforming to IEC 60068-2-35...95 % without dripping water conforming to IEC 60068-2-3 | 15 gn for 11 ms conforming to IEC 60068-2-27 | -25...70 °C | IP20 on upper part without blanking plate on cover conforming to EN/IEC 60529IP20 on upper part without blanking plate on cover conforming to EN/IEC 61800-5-1IP21 conforming to EN/IEC 60529IP21 conforming to EN/IEC 61800-5-1IP41 on upper part conforming to EN/IEC 60529IP41 on upper part conforming to EN/IEC 61800-5-1 | <= 1000 m without derating1000...3000 m (limited to 2000 m for the Corner Grounded distribution network) with current derating 1 % per 100 m | 1.5 mm (f = 3...13 Hz) conforming to EN/IEC 60068-2-61 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-8 | -10...40 °C without derating> 40...50 °C with derating factor | 59.9 dB conforming to 86/188/EEC | +/- 0.6 % (VIA) for a temperature variation 60 °C+/- 0.6 % (VIB) for a temperature variation 60 °C+/- 1 % (FM) for a temperature variation 60 °C | Electrical between power and control | 214 mm | 420 mm | IEC cable without mounting kit: 1 wire(s) - 45 °C, copper 90 °C / XLPE/EPRIEC cable without mounting kit: 1 wire(s) - 45 °C, copper 70 °C / PVCUL 508 cable with UL Type 1 kit: 3 wire(s) - 40 °C, copper 75 °C / PVC | No impedance | +/- 15 % | 8 bits, 1 stop, odd even or no configurable parity | Communication card for LonWorks | 33.2 kVA for 380 V | 26.4 kg | - | - | - | - | 626 W | 47.5...63 Hz | 214 m3/h | Monitoring inhibitableRead device identification (43)Read holding registers (03) 2 words maximumTime out setting from 0.1 to 100 sWrite multiple registers (16) 2 words maximumWrite single register (06) | ATV212 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
 ATV212HD30N4 施耐德(SCHNEIDER) 风泵变频器 Schneider Electric component ATV212HD30N4: variable speed drive ATV212 - 30kW - 40hp - 480V - 3ph - EMC - IP21 施耐德 | - | 22 kA | EN 55011 class A group 1EN 61800-3EN 61800-3 category C2EN 61800-3 category C3EN 61800-3 environments 1 category C1EN 61800-3 environments 1 category C2EN 61800-3 environments 1 category C3EN 61800-3 environments 2 category C1EN 61800-3 environments 2 category C2EN 61800-3 environments 2 category C3EN 61800-5-1IEC 61800-3IEC 61800-3 category C2IEC 61800-3 category C3IEC 61800-3 environments 1 category C1IEC 61800-3 environments 1 category C2IEC 61800-3 environments 1 category C3IEC 61800-3 environments 2 category C1IEC 61800-3 environments 2 category C2IEC 61800-3 environments 2 category C3IEC 61800-5-1UL Type 1 | Class C2 EMC filter integrated | Overheating protection for driveShort-circuit between motor phases for driveOvercurrent between output phases and earth for driveOvervoltages on the DC bus for driveBreak on the control circuit for driveAgainst exceeding limit speed for driveLine supply undervoltage for driveAgainst input phase loss for driveThermal protection for motorMotor phase break for motorInput phase breaks for driveThermal power stage for driveLine supply overvoltage and undervoltage for driveWith PTC probes for motor | CSAC-TickNOM 117UL | +/- 10 % of nominal slip for 0.2 Tn to Tn torque variation | Configurable relay logic: (FLA, FLC) NO - 100000 cyclesConfigurable relay logic: (FLB, FLC) NC - 100000 cyclesConfigurable relay logic: (RY, RC) NO - 100000 cycles | 9600 bps or 19200 bps | 2-wire RS 485 | +/- 0.15 % of maximum value for input (VIA)+/- 0.15 % of maximum value for input (VIB)+/- 0.2 % for output (FM) | Switch-configurable voltage: (VIA) 0...10 V DC - 24 V max - 30000 Ohm - resolution: 10 bitsSwitch-configurable current: (VIA) 0...20 mA - 250 Ohm - resolution: 10 bitsConfigurable voltage: (VIB) 0...10 V DC - 24 V max - 30000 Ohm - resolution: 10 bitsConfigurable PTC probe: (VIB) 0...6 probes - 1500 Ohm | Switch-configurable voltage: (FM) 0...10 V DC - 7620 Ohm - resolution: 10 bitsSwitch-configurable current: (FM) 0...20 mA - 970 Ohm - resolution: 10 bits | 2 ms +/- 0.5 ms (FM) - analog output(s)7 ms +/- 0.5 ms (FLA, FLC) - discrete output(s)7 ms +/- 0.5 ms (FLB, FLC) - discrete output(s)7 ms +/- 0.5 ms (RY, RC) - discrete output(s) | 30 kW | <= power supply voltage | 44.7 A for 480 V56.7 A for 380 V | 2 | Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC, +/- 5 % - <= 10 A with overload and short-circuit protectionInternal supply: 24 V (21...27 V) DC - <= 200 A with overload and short-circuit protection | 2 | 40 hp | 3 mA at 24 V DC (configurable relay logic) | 0.1 Hz for display unit0.024/50 Hz for analog input | 3535 V DC between earth and power terminals5092 V DC between control and power terminals | 5 A at 250 V AC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R)5 A at 30 V DC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R)2 A at 250 V AC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R)2 A at 30 V DC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R) | 0.5...200 Hz | 8 kHz | 6...16 kHz adjustable8...16 kHz with derating factor | >= 1 MOhm at 500 V DC for 1 minute | Adjustable PI regulator | 2 ms +/- 0.5 ms (F) - discrete input(s)2 ms +/- 0.5 ms (R) - discrete input(s)2 ms +/- 0.5 ms (RES) - discrete input(s)3.5 ms +/- 0.5 ms (VIA) - analog input(s)22 ms +/- 0.5 ms (VIB) - analog input(s) | 64.4 A for 60 s | 120 % of nominal motor torque, +/- 10 % for 60 s | 240 mm | By DC injection | Automatic based on the loadLinear adjustable separately from 0.01 to 3200 s | 1 RJ451 open style | With heat sink | 3 phases | 0.6 N.m (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)24 N.m - 212 lb.in (L1/R, L2/S, L3/T) | APOGEE FLNBACnetLonWorksMETASYS N2Modbus | CE | Variable speed drive | RTU | Altivar 212 | Vertical +/- 10 degree | AdjustableAutomatic whatever the loadNot available in voltage/frequency ratio motor control | 1...247 | Programmable (F) 24 V DC, with level 1 PLC - 4700 OhmProgrammable (R) 24 V DC, with level 1 PLC - 4700 OhmProgrammable (RES) 24 V DC, with level 1 PLC - 4700 Ohm | Pumps and fans in HVAC | Asynchronous motors | 5...95 % without condensation conforming to IEC 60068-2-35...95 % without dripping water conforming to IEC 60068-2-3 | 15 gn for 11 ms conforming to IEC 60068-2-27 | -25...70 °C | IP20 on upper part without blanking plate on cover conforming to EN/IEC 60529IP20 on upper part without blanking plate on cover conforming to EN/IEC 61800-5-1IP21 conforming to EN/IEC 60529IP21 conforming to EN/IEC 61800-5-1IP41 on upper part conforming to EN/IEC 60529IP41 on upper part conforming to EN/IEC 61800-5-1 | <= 1000 m without derating1000...3000 m (limited to 2000 m for the Corner Grounded distribution network) with current derating 1 % per 100 m | 1.5 mm (f = 3...13 Hz) conforming to EN/IEC 60068-2-61 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-8 | -10...40 °C without derating> 40...50 °C with derating factor | 59.9 dB conforming to 86/188/EEC | +/- 0.6 % (VIA) for a temperature variation 60 °C+/- 0.6 % (VIB) for a temperature variation 60 °C+/- 1 % (FM) for a temperature variation 60 °C | Electrical between power and control | 214 mm | 420 mm | IEC cable without mounting kit: 1 wire(s) - 45 °C, copper 90 °C / XLPE/EPRIEC cable without mounting kit: 1 wire(s) - 45 °C, copper 70 °C / PVCUL 508 cable with UL Type 1 kit: 3 wire(s) - 40 °C, copper 75 °C / PVC | No impedance | +/- 15 % | 8 bits, 1 stop, odd even or no configurable parity | Communication card for LonWorks | 44.6 kVA for 380 V | 26.4 kg | - | - | - | - | 847 W | 47.5...63 Hz | 290 m3/h | Monitoring inhibitableRead device identification (43)Read holding registers (03) 2 words maximumTime out setting from 0.1 to 100 sWrite multiple registers (16) 2 words maximumWrite single register (06) | ATV212 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
 ATV61E5U22N4 施耐德(SCHNEIDER) 风泵变频器 Schneider Electric component ATV61E5U22N4: variable speed drive ATV61 - 2.2kW 3HP - 380...480V - EMC filter - IP54 施耐德 | - | 5 kA | EN 55011 class A group 1EN 61800-3 environments 1 category C2EN 61800-3 environments 2 category C2EN/IEC 61800-3EN/IEC 61800-5-1IEC 60721-3-3 class 3C1IEC 60721-3-3 class 3S2UL Type 12 | Class C2 EMC filter integrated | Drive against exceeding limit speedDrive against input phase lossDrive break on the control circuitDrive input phase breaksDrive line supply overvoltageDrive line supply undervoltageDrive overcurrent between output phases and earthDrive overheating protectionDrive overvoltages on the DC busDrive power removalDrive short-circuit between motor phasesDrive thermal protectionMotor motor phase breakMotor power removalMotor thermal protection | CSAC-TickDNVGOSTNOM 117UL | +/- 10 % of nominal slip for 0.2 Tn to Tn torque variation without speed feedback | (R1A, R1B, R1C) configurable relay logic NO/NC, electrical durability 100000 cycles(R2A, R2B) configurable relay logic NO, electrical durability 100000 cycles | 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus on terminal9600 bps, 19200 bps for Modbus on front face | 2-wire RS 485 for Modbus | AI1-/Al1+ +/- 0.15 % of maximum valueAI2 +/- 0.15 % of maximum valueAO1 +/- 0.2 % | AI1-/Al1+ bipolar differential voltage +/- 10 V DC, input voltage 24 V max, resolution 11 bits + signAI2 software-configurable current 0...20 mA, impedance 242 Ohm, resolution 11 bitsAI2 software-configurable voltage 0...10 V DC, input voltage 24 V max, impedance 30000 Ohm, resolution 11 bits | AO1 software-configurable current, analogue output range 0...20 mA, impedance 500 Ohm, resolution 10 bitsAO1 software-configurable logic output 10 V, <= 20 mAAO1 software-configurable voltage, analogue output range 0...10 V DC, impedance 470 Ohm, resolution 10 bits | <= 100 ms in STO (Safe Torque Off)R1A, R1B, R1C <= 7 ms, tolerance +/- 0.5 msR2A, R2B <= 7 ms, tolerance +/- 0.5 ms | 2.2 kW | <= power supply voltage | 5 A for 380 V4.1 A for 480 V | 2 | Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <= 10 mA for overload and short-circuit protectionInternal supply 24 V DC (21...27 V), <= 200 mA for overload and short-circuit protectionExternal supply 24 V DC (19...30 V) | 2 | 3 hp | Configurable relay logic 3 mA at 24 V DC | Analog input 0.024/50 HzDisplay unit 0.1 Hz | 3535 V DC between earth and power terminals5092 V DC between control and power terminals | R1, R2 on resistive load, 5 A at 250 V AC, cos phi = 1, L/R = 0 msR1, R2 on resistive load, 5 A at 30 V DC, cos phi = 1, L/R = 0 msR1, R2 on inductive load, 2 A at 250 V AC, cos phi = 0.4, L/R = 7 msR1, R2 on inductive load, 2 A at 30 V DC, cos phi = 0.4, L/R = 7 ms | 0.5...500 Hz | 8 kHz | 2...16 kHz adjustable8...16 kHz with derating factor | > 1 mOhm at 500 V DC for 1 minute to earth | Frequency PI regulator | Analog input AI1-/Al1+ 2 ms, +/- 0.5 msAnalog input Al2 2 ms, +/- 0.5 msAnalog output AO1 2 ms, +/- 0.5 msDiscrete input LI1...LI5 2 ms, +/- 0.5 msDiscrete input LI6 (if configured as logic input)2 ms, +/- 0.5 ms | 5.6 A for 60 s | 130 % of nominal motor torque, +/- 10 % for 60 s | 240 mm | By DC injection | Automatic adaptation of ramp if braking capacity exceeded, by using resistorLinear adjustable separately from 0.01 to 9000 sS, U or customized | 1 RJ45 for Modbus on front faceMale SUB-D 9 on RJ45 for CANopen on terminal | Enclosed with Vario switch disconnector | 3 phases | AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR 0.6 N.mU/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB 1.4 N.m / 12.3 lb.inL1/R, L2/S, L3/T 2.1 N.m / 18.3 lb.in | CANopenModbus | CE | Variable speed drive | RTU for Modbus | Altivar 61 | Vertical +/- 10 degree | AdjustableAutomatic whatever the loadCan be suppressedNot available in voltage/frequency ratio (2 or 5 points) | 1...247 for Modbus1...127 for CANopen | (LI1...LI5) programmable, 24 V DC, voltage limits <= 30 V, with level 1 PLC, impedance 3500 Ohm(LI6) switch-configurable, 24 V DC, voltage limits <= 30 V, with level 1 PLC, impedance 3500 Ohm(PWR) safety input, 24 V DC, voltage limits <= 30 V, impedance 1500 Ohm(LI6) switch-configurable PTC probe, 0...6 probes, impedance 1500 Ohm | Pumping and ventilation machine | Asynchronous motorsSynchronous motors | 5...95 % without condensation conforming to IEC 60068-2-35...95 % without dripping water conforming to IEC 60068-2-3 | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 | -25...70 °C | IP54 conforming to EN/IEC 61800-5-1IP54 conforming to UL Type 12IP54 conforming to EN/IEC 60529 | <= 1000 m without derating1000...3000 m with current derating 1 % per 100 m | 1.5 mm peak to peak (f = 3...13 Hz) conforming to EN/IEC 60068-2-61 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-6 | -10...40 °C without derating-10...50 °C with derating | 43 dB conforming to 86/188/EEC | AI1-/Al1+ +/- 0.6 % for a temperature variation 60 °CAI2 +/- 0.6 % for a temperature variation 60 °CAO1 +/- 0.6 % for a temperature variation 60 °C | Between power and control terminals | 296 mm | 490 mm | With an IP21 or an IP31 kit: 3-strand IEC cable at 40 °C, copper 70 °C PVCWith UL Type 1 kit: 3-strand UL 508 cable at 40 °C, copper 75 °C PVCWithout mounting kit: 1-strand IEC cable at 45 °C, copper 70 °C PVCWithout mounting kit: 1-strand IEC cable at 45 °C, copper 90 °C XLPE/EPR | No impedance for Modbus | +/- 15 % in open-loop mode, without speed feedback | 8 bits, 1 stop, even parity for Modbus on front face8 bits, odd even or no configurable parity for Modbus on terminal | APOGEE FLN communication cardBACnet communication cardCC-Link communication cardController inside programmable cardDeviceNet communication cardEthernet/IP communication cardFipio communication cardI/O extension cardInterbus-S communication cardLonWorks communication cardMETASYS N2 communication cardModbus Plus communication cardModbus TCP communication cardModbus/Uni-Telway communication cardMulti-pump cardProfibus DP communication cardProfibus DP V1 communication card | 3.3 kVA for 380 V | 16.4 kg | 47.5...63 Hz | ATV61 | 7 | Slave for CANopen | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
 ATV31C055M2 施耐德(SCHNEIDER) 风泵变频器 Schneider Electric component ATV31C055M2: enclosed variable speed drive ATV31 - 0.55kW - 240V - IP55 Schneider Electric ALTIVAR 31 系列 IP55 0.55 kW 变频器驱动 , 0.5 → 500Hz, 6.8 A, 200 → 240 V 施耐德 | 10 | 1: ¥3,264.10 | 1 kA | EN 50178 | Integrated | Input phase breaks driveLine supply overvoltage and undervoltage safety circuits driveLine supply phase loss safety function, for three phases supply driveMotor phase breaks driveOvercurrent between output phases and earth (on power up only) driveOverheating protection driveShort-circuit between motor phases driveThermal protection motor | CSAC-TickN998UL | 1...50 | Configurable relay logic R1A, R1B, R1C 1 NO + 1 NC 100000 cyclesConfigurable relay logic R2A, R2B NC 100000 cycles | 10, 20, 50, 125, 250, 500 kbps or 1 Mbps CANopen via VW3 CANTAP2 adaptor4800, 9600 or 19200 bps Modbus | RS485 multidrop serial link Modbus | +/- 0.2 % output | Configurable current AI3 0...20 mA 250 OhmConfigurable voltage AI1 0...10 V 30 V max 30000 OhmConfigurable voltage AI2 +/- 10 V 30 V max 30000 Ohm | Configurable current AOC 0...20 mA 800 Ohm 8 bitsConfigurable voltage AOV 0...10 V 470 Ohm 8 bits | 8 ms analog AOV, AOC8 ms discrete R1A, R1B, R1C, R2A, R2B | 0.55 kW | <= power supply voltage | 5.8 A 240 V 1 kA6.8 A 200 V 1 kA | 3 | Internal supply for logic inputs 19...30 V > 0...0.1 A overload protectionInternal supply for logic inputs 19...30 V > 0...0.1 A short-circuit protectionInternal supply for reference potentiometer 10...10.8 V > 0...0.01 A overload protectionInternal supply for reference potentiometer 10...10.8 V > 0...0.01 A short-circuit protection | 2 | 0.75 hp | 10 mA 5 V DC R1-R2 | 0.1 Hz display unit0.1...100 Hz analog input | 2040 V DC between earth and power terminals2880 V AC between control and power terminals | 2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms R1-R22 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms R1-R25 A 250 V AC resistive cos phi = 1 L/R = 0 ms R1-R25 A 30 V DC resistive cos phi = 1 L/R = 0 ms R1-R2 | 0.5...500 Hz | 4 kHz | 2...16 kHz adjustable | >= 500 mOhm 500 V DC for 1 minute | Frequency PI regulator | 4 ms LI1...LI6 discrete8 ms AI1, AI2, AI3 analog | 5.6 A 60 s | 150...170 % of nominal motor torque | 210mm | By DC injection | Linear adjustable separately from 0.1 to 999.9 sS, U or customized | 1 RJ45 CANopen via VW3 CANTAP2 adaptor1 RJ45 Modbus | Enclosed | Single phase | <= 150 % with braking resistor 60 s100 % with braking resistor continuously100 % without braking resistor | CANopenModbus | CE | Variable speed drive | RTU Modbus | Altivar 31 | Vertical +/- 10 degree | AdjustableAutomatic whatever the loadSuppressable | 1...127 CANopen via VW3 CANTAP2 adaptor1...247 Modbus | Programmable LI1...LI6 24 V 0...100 mA PLC 3500 Ohm | Simple machine | Asynchronous motors | 5...95 % without condensation IEC 60068-2-35...95 % without dripping water IEC 60068-2-3 | 15 gn 11 ms EN/IEC 60068-2-27 | -25...70 °C | 2 | <= 1000 m without<= 1000 m without derating>= 1000 m with current derating 1 % per 100 m | 1 gn 13...150 Hz EN/IEC 60068-2-61.5 mm 3...13 Hz EN/IEC 60068-2-6 | -10...50 °C without derating with protective cover on top of the drive-10...60 °C with derating factor without protective cover on top of the drive | - | - | - | - | - | - | - | - | - | - | 1.4 kVA | 6.3 kg | 47.5...63 Hz | ATV31 | 6 | - | 46 W at nominal load | - | - | - | - | 是 | 0.55 kW | 240mm | ALTIVAR 31 | CANOpen, ModBus | 是 | -10 → +50°C | - | - | - | - | - | 3.7 A 4 kHz | 5 ms for reference change | Electrical between power and control | 127 CANopen via VW3 CANTAP2 adaptor31 Modbus | TC |
 ATV61WU55N4 施耐德(SCHNEIDER) 风泵变频器 Schneider Electric component ATV61WU55N4: variable speed drive ATV61 - 5.5kW 7.5HP - 380...480V - EMC filter - IP54 施耐德 | - | 22 kA 3 phases | EN 55011 class A group 1EN 61800-3 environments 1 category C2EN 61800-3 environments 2 category C2EN/IEC 61800-3EN/IEC 61800-5-1IEC 60721-3-3 class 3C1IEC 60721-3-3 class 3S2UL Type 12 | Class C2 EMC filter integrated | Drive against exceeding limit speedDrive against input phase lossDrive break on the control circuitDrive input phase breaksDrive line supply overvoltageDrive line supply undervoltageDrive overcurrent between output phases and earthDrive overheating protectionDrive overvoltages on the DC busDrive power removalDrive short-circuit between motor phasesDrive thermal protectionMotor motor phase breakMotor power removalMotor thermal protection | CSAC-TickDNVGOSTNOM 117UL | +/- 10 % of nominal slip for 0.2 Tn to Tn torque variation without speed feedback | (R1A, R1B, R1C) configurable relay logic NO/NC, electrical durability 100000 cycles(R2A, R2B) configurable relay logic NO, electrical durability 100000 cycles | 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus on terminal9600 bps, 19200 bps for Modbus on front face | 2-wire RS 485 for Modbus | AI1-/Al1+ +/- 0.15 % of maximum valueAI2 +/- 0.15 % of maximum valueAO1 +/- 0.2 % | AI1-/Al1+ bipolar differential voltage +/- 10 V DC, input voltage 24 V max, resolution 11 bits + signAI2 software-configurable current 0...20 mA, impedance 242 Ohm, resolution 11 bitsAI2 software-configurable voltage 0...10 V DC, input voltage 24 V max, impedance 30000 Ohm, resolution 11 bits | AO1 software-configurable current, analogue output range 0...20 mA, impedance 500 Ohm, resolution 10 bitsAO1 software-configurable logic output 10 V, <= 20 mAAO1 software-configurable voltage, analogue output range 0...10 V DC, impedance 470 Ohm, resolution 10 bits | <= 100 ms in STO (Safe Torque Off)R1A, R1B, R1C <= 7 ms, tolerance +/- 0.5 msR2A, R2B <= 7 ms, tolerance +/- 0.5 ms | 5.5 kW 3 phases at 380...480 V | <= power supply voltage | 11.4 A for 380 V 3 phases 5.5 kW / 7.5 hp9.2 A for 480 V 3 phases 5.5 kW / 7.5 hp | 2 | Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <= 10 mA for overload and short-circuit protectionInternal supply 24 V DC (21...27 V), <= 200 mA for overload and short-circuit protectionExternal supply 24 V DC (19...30 V), 30 W | 2 | 7.5 hp 3 phases at 380...480 V | Configurable relay logic 3 mA at 24 V DC | Analog input 0.024/50 HzDisplay unit 0.1 Hz | 3535 V DC between earth and power terminals5092 V DC between control and power terminals | R1, R2 on resistive load, 5 A at 250 V AC, cos phi = 1, L/R = 0 msR1, R2 on resistive load, 5 A at 30 V DC, cos phi = 1, L/R = 0 msR1, R2 on inductive load, 2 A at 250 V AC, cos phi = 0.4, L/R = 7 msR1, R2 on inductive load, 2 A at 30 V DC, cos phi = 0.4, L/R = 7 ms | 0.1...500 Hz | 8 kHz | 2...16 kHz adjustable8...16 kHz with derating factor | > 1 mOhm at 500 V DC for 1 minute to earth | Frequency PI regulator | Analog input AI1-/Al1+ 2 ms, +/- 0.5 msAnalog input Al2 2 ms, +/- 0.5 msAnalog output AO1 2 ms, +/- 0.5 msDiscrete input LI1...LI5 2 ms, +/- 0.5 msDiscrete input LI6 (if configured as logic input)2 ms, +/- 0.5 ms | 13.2 A for 60 s 3 phases | 130 % of nominal motor torque, +/- 10 % for 60 s | 240 mm | By DC injection | Automatic adaptation of ramp if braking capacity exceeded, by using resistorLinear adjustable separately from 0.01 to 9000 sS, U or customized | 1 RJ45 for Modbus on front face1 RJ45 for Modbus on terminalMale SUB-D 9 on RJ45 for CANopen | Enclosed | 3 phases | AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR 0.6 N.mL1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB 1.4 N.m / 12.3 lb.in | CANopenModbus | CE | Variable speed drive | RTU for Modbus | Altivar 61 | Vertical +/- 10 degree | AdjustableAutomatic whatever the loadCan be suppressedNot available in voltage/frequency ratio (2 or 5 points) | 1...247 for Modbus1...127 for CANopen | (LI1...LI5) programmable, 24 V DC, voltage limits <= 30 V, with level 1 PLC, impedance 3500 Ohm(LI6) switch-configurable, 24 V DC, voltage limits <= 30 V, with level 1 PLC, impedance 3500 Ohm(LI6) switch-configurable PTC probe, 0...6, impedance 1500 Ohm(PWR) safety input, 24 V DC, voltage limits <= 30 V, impedance 1500 Ohm | Pumping and ventilation machine | Asynchronous motorsSynchronous motors | 5...95 % without condensation conforming to IEC 60068-2-35...95 % without dripping water conforming to IEC 60068-2-3 | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 | -25...70 °C | IP54 conforming to EN/IEC 61800-5-1IP54 conforming to UL Type 12IP54 conforming to EN/IEC 60529 | <= 1000 m without derating1000...3000 m with current derating 1 % per 100 m | 1.5 mm peak to peak (f = 3...13 Hz) conforming to EN/IEC 60068-2-61 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-6 | -10...40 °C without derating-10...50 °C with derating factor | 54.5 dB conforming to 86/188/EEC | AI1-/Al1+ +/- 0.6 % for a temperature variation 60 °CAI2 +/- 0.6 % for a temperature variation 60 °CAO1 +/- 1 % for a temperature variation 60 °C | Between power and control terminals | 286 mm | 490 mm | With an IP21 or an IP31 kit: 3-strand IEC cable at 40 °C, copper 70 °C PVCWith UL Type 1 kit: 3-strand UL 508 cable at 40 °C, copper 75 °C PVCWithout mounting kit: 1-strand IEC cable at 45 °C, copper 70 °C PVCWithout mounting kit: 1-strand IEC cable at 45 °C, copper 90 °C XLPE/EPR | No impedance for Modbus | +/- 15 % in open-loop mode, without speed feedback | 8 bits, 1 stop, even parity for Modbus on front face8 bits, odd even or no configurable parity for Modbus on terminal | APOGEE FLN communication cardBACnet communication cardCC-Link communication cardController inside programmable cardDeviceNet communication cardEthernet/IP communication cardFipio communication cardI/O extension cardInterbus-S communication cardLonWorks communication cardMETASYS N2 communication cardModbus Plus communication cardModbus TCP communication cardModbus/Uni-Telway communication cardMulti-pump cardProfibus DP communication cardProfibus DP V1 communication card | 7.5 kVA for 380 V 3 phases 5.5 kW / 7.5 hp | 16 kg | 47.5...63 Hz | ATV61 | 7 | Slave for CANopen | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
 ATV61H075N4Z 施耐德(SCHNEIDER) 风泵变频器 Schneider Electric component ATV61H075N4Z: variable speed drive ATV61 - 0.75kW 1HP - 380...480V - IP20 施耐德 | - | 5 kA 3 phases | EN 55011 class A group 1EN 61800-3 environments 1 category C2EN 61800-3 environments 2 category C2EN/IEC 61800-3EN/IEC 61800-5-1IEC 60721-3-3 class 3C1IEC 60721-3-3 class 3S2UL Type 1 | Class C2 EMC filter integrated | Drive against exceeding limit speedDrive against input phase lossDrive break on the control circuitDrive input phase breaksDrive line supply overvoltageDrive line supply undervoltageDrive overcurrent between output phases and earthDrive overheating protectionDrive overvoltages on the DC busDrive power removalDrive short-circuit between motor phasesDrive thermal protectionMotor motor phase breakMotor power removalMotor thermal protection | CSAC-TickDNVGOSTNOM 117UL | +/- 10 % of nominal slip for 0.2 Tn to Tn torque variation without speed feedback | (R1A, R1B, R1C) configurable relay logic NO/NC, electrical durability 100000 cycles(R2A, R2B) configurable relay logic NO, electrical durability 100000 cycles | 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus on terminal9600 bps, 19200 bps for Modbus on front face | 2-wire RS 485 for Modbus | AI1-/Al1+ +/- 0.15 % of maximum valueAI2 +/- 0.15 % of maximum valueAO1 +/- 0.2 % | AI1-/Al1+ bipolar differential voltage +/- 10 V DC, input voltage 24 V max, resolution 11 bits + signAI2 software-configurable current 0...20 mA, impedance 242 Ohm, resolution 11 bitsAI2 software-configurable voltage 0...10 V DC, input voltage 24 V max, impedance 30000 Ohm, resolution 11 bits | AO1 software-configurable current, analogue output range 0...20 mA, impedance 500 Ohm, resolution 10 bitsAO1 software-configurable logic output 10 V, <= 20 mAAO1 software-configurable voltage, analogue output range 0...10 V DC, impedance 470 Ohm, resolution 10 bits | <= 100 ms in STO (Safe Torque Off)R1A, R1B, R1C <= 7 ms, tolerance +/- 0.5 msR2A, R2B <= 7 ms, tolerance +/- 0.5 ms | 0.75 kW 3 phases at 380...480 V | <= power supply voltage | 3 A for 480 V 3 phases 0.75 kW / 1 hp3.7 A for 380 V 3 phases 0.75 kW / 1 hp | 2 | Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <= 10 mA for overload and short-circuit protectionInternal supply 24 V DC (21...27 V), <= 200 mA for overload and short-circuit protectionExternal supply 24 V DC (19...30 V), 30 W | 2 | 1 hp 3 phases at 380...480 V | Configurable relay logic 3 mA at 24 V DC | Analog input 0.024/50 HzDisplay unit 0.1 Hz | 3535 V DC between earth and power terminals5092 V DC between control and power terminals | R1, R2 on resistive load, 5 A at 250 V AC, cos phi = 1, L/R = 0 msR1, R2 on resistive load, 5 A at 30 V DC, cos phi = 1, L/R = 0 msR1, R2 on inductive load, 2 A at 250 V AC, cos phi = 0.4, L/R = 7 msR1, R2 on inductive load, 2 A at 30 V DC, cos phi = 0.4, L/R = 7 ms | 0.1...1000 Hz | 12 kHz | 1...16 kHz adjustable12...16 kHz with derating factor | > 1 mOhm at 500 V DC for 1 minute to earth | Frequency PI regulator | Analog input AI1-/Al1+ 2 ms, +/- 0.5 msAnalog input Al2 2 ms, +/- 0.5 msAnalog output AO1 2 ms, +/- 0.5 msDiscrete input LI1...LI5 2 ms, +/- 0.5 msDiscrete input LI6 (if configured as logic input)2 ms, +/- 0.5 ms | 2.7 A for 60 s 3 phases | 130 % of nominal motor torque, +/- 10 % for 60 s | 130 mm | By DC injection | Automatic adaptation of ramp if braking capacity exceeded, by using resistorLinear adjustable separately from 0.01 to 9000 sS, U or customized | 1 RJ45 for Modbus on front face1 RJ45 for Modbus on terminalMale SUB-D 9 on RJ45 for CANopen | With heat sink | 3 phases | AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR 0.6 N.mL1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB 1.4 N.m / 12.3 lb.in | CANopenModbus | CE | Variable speed drive | RTU for Modbus | Altivar 61 | Vertical +/- 10 degree | AdjustableAutomatic whatever the loadCan be suppressedNot available in voltage/frequency ratio (2 or 5 points) | 1...247 for Modbus1...127 for CANopen | (LI1...LI5) programmable, 24 V DC, voltage limits <= 30 V, with level 1 PLC, impedance 3500 Ohm(LI6) switch-configurable, 24 V DC, voltage limits <= 30 V, with level 1 PLC, impedance 3500 Ohm(LI6) switch-configurable PTC probe, 0...6, impedance 1500 Ohm(PWR) safety input, 24 V DC, voltage limits <= 30 V, impedance 1500 Ohm | Pumping and ventilation machine | Asynchronous motorsSynchronous motors | 5...95 % without condensation conforming to IEC 60068-2-35...95 % without dripping water conforming to IEC 60068-2-3 | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 | -25...70 °C | IP20 on upper part without blanking plate on cover conforming to EN/IEC 60529IP20 on upper part without blanking plate on cover conforming to EN/IEC 61800-5-1IP21 conforming to EN/IEC 60529IP21 conforming to EN/IEC 61800-5-1IP41 on upper part conforming to EN/IEC 60529IP41 on upper part conforming to EN/IEC 61800-5-1IP54 on lower part conforming to EN/IEC 60529IP54 on lower part conforming to EN/IEC 61800-5-1 | <= 1000 m without derating1000...3000 m with current derating 1 % per 100 m | 1.5 mm peak to peak (f = 3...13 Hz) conforming to EN/IEC 60068-2-61 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-6 | -10...50 °C without derating50...60 °C with derating factor | 43 dB conforming to 86/188/EEC | AI1-/Al1+ +/- 0.6 % for a temperature variation 60 °CAI2 +/- 0.6 % for a temperature variation 60 °CAO1 +/- 1 % for a temperature variation 60 °C | Between power and control terminals | 175 mm | 230 mm | With an IP21 or an IP31 kit: 3-strand IEC cable at 40 °C, copper 70 °C PVCWith UL Type 1 kit: 3-strand UL 508 cable at 40 °C, copper 75 °C PVCWithout mounting kit: 1-strand IEC cable at 45 °C, copper 70 °C PVCWithout mounting kit: 1-strand IEC cable at 45 °C, copper 90 °C XLPE/EPR | No impedance for Modbus | +/- 15 % in open-loop mode, without speed feedback | 8 bits, 1 stop, even parity for Modbus on front face8 bits, odd even or no configurable parity for Modbus on terminal | APOGEE FLN communication cardBACnet communication cardCC-Link communication cardController inside programmable cardDeviceNet communication cardEthernet/IP communication cardFipio communication cardI/O extension cardInterbus-S communication cardLonWorks communication cardMETASYS N2 communication cardModbus Plus communication cardModbus TCP communication cardModbus/Uni-Telway communication cardMulti-pump cardProfibus DP communication cardProfibus DP V1 communication card | 2.4 kVA for 380 V 3 phases 0.75 kW / 1 hp | 3 kg | 47.5...63 Hz | ATV61 | 7 | Slave for CANopen | - | - | - | - | - | - | - | - | - | - | - | - | Without remote graphic terminal | - | - | - | - | - | - | - | - | - | |
 ATV61WD15N4 施耐德(SCHNEIDER) 风泵变频器 Schneider Electric component ATV61WD15N4: variable speed drive ATV61 - 15kW 20HP - 380...480V - EMC filter - IP54 施耐德 | - | 22 kA 3 phases | EN 55011 class A group 1EN 61800-3 environments 1 category C2EN 61800-3 environments 2 category C2EN/IEC 61800-3EN/IEC 61800-5-1IEC 60721-3-3 class 3C1IEC 60721-3-3 class 3S2UL Type 12 | Class C2 EMC filter integrated | Drive against exceeding limit speedDrive against input phase lossDrive break on the control circuitDrive input phase breaksDrive line supply overvoltageDrive line supply undervoltageDrive overcurrent between output phases and earthDrive overheating protectionDrive overvoltages on the DC busDrive power removalDrive short-circuit between motor phasesDrive thermal protectionMotor motor phase breakMotor power removalMotor thermal protection | CSAC-TickDNVGOSTNOM 117UL | +/- 10 % of nominal slip for 0.2 Tn to Tn torque variation without speed feedback | (R1A, R1B, R1C) configurable relay logic NO/NC, electrical durability 100000 cycles(R2A, R2B) configurable relay logic NO, electrical durability 100000 cycles | 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus on terminal9600 bps, 19200 bps for Modbus on front face | 2-wire RS 485 for Modbus | AI1-/Al1+ +/- 0.15 % of maximum valueAI2 +/- 0.15 % of maximum valueAO1 +/- 0.2 % | AI1-/Al1+ bipolar differential voltage +/- 10 V DC, input voltage 24 V max, resolution 11 bits + signAI2 software-configurable current 0...20 mA, impedance 242 Ohm, resolution 11 bitsAI2 software-configurable voltage 0...10 V DC, input voltage 24 V max, impedance 30000 Ohm, resolution 11 bits | AO1 software-configurable current, analogue output range 0...20 mA, impedance 500 Ohm, resolution 10 bitsAO1 software-configurable logic output 10 V, <= 20 mAAO1 software-configurable voltage, analogue output range 0...10 V DC, impedance 470 Ohm, resolution 10 bits | <= 100 ms in STO (Safe Torque Off)R1A, R1B, R1C <= 7 ms, tolerance +/- 0.5 msR2A, R2B <= 7 ms, tolerance +/- 0.5 ms | 15 kW 3 phases at 380...480 V | <= power supply voltage | 25.8 A for 480 V 3 phases 15 kW / 20 hp30.5 A for 380 V 3 phases 15 kW / 20 hp | 2 | Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <= 10 mA for overload and short-circuit protectionInternal supply 24 V DC (21...27 V), <= 200 mA for overload and short-circuit protectionExternal supply 24 V DC (19...30 V), 30 W | 2 | 20 hp 3 phases at 380...480 V | Configurable relay logic 3 mA at 24 V DC | Analog input 0.024/50 HzDisplay unit 0.1 Hz | 3535 V DC between earth and power terminals5092 V DC between control and power terminals | R1, R2 on resistive load, 5 A at 250 V AC, cos phi = 1, L/R = 0 msR1, R2 on resistive load, 5 A at 30 V DC, cos phi = 1, L/R = 0 msR1, R2 on inductive load, 2 A at 250 V AC, cos phi = 0.4, L/R = 7 msR1, R2 on inductive load, 2 A at 30 V DC, cos phi = 0.4, L/R = 7 ms | 0.1...1000 Hz | 8 kHz | 2...16 kHz adjustable8...16 kHz with derating factor | > 1 mOhm at 500 V DC for 1 minute to earth | Frequency PI regulator | Analog input AI1-/Al1+ 2 ms, +/- 0.5 msAnalog input Al2 2 ms, +/- 0.5 msAnalog output AO1 2 ms, +/- 0.5 msDiscrete input LI1...LI5 2 ms, +/- 0.5 msDiscrete input LI6 (if configured as logic input)2 ms, +/- 0.5 ms | 33.5 A for 60 s 3 phases | 130 % of nominal motor torque, +/- 10 % for 60 s | 295 mm | By DC injection | Automatic adaptation of ramp if braking capacity exceeded, by using resistorLinear adjustable separately from 0.01 to 9000 sS, U or customized | 1 RJ45 for Modbus on front face1 RJ45 for Modbus on terminalMale SUB-D 9 on RJ45 for CANopen | Enclosed | 3 phases | L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB 3 N.m / 26.5 lb.inAI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR 0.6 N.m | CANopenModbus | CE | Variable speed drive | RTU for Modbus | Altivar 61 | Vertical +/- 10 degree | AdjustableAutomatic whatever the loadCan be suppressedNot available in voltage/frequency ratio (2 or 5 points) | 1...247 for Modbus1...127 for CANopen | (LI1...LI5) programmable, 24 V DC, voltage limits <= 30 V, with level 1 PLC, impedance 3500 Ohm(LI6) switch-configurable, 24 V DC, voltage limits <= 30 V, with level 1 PLC, impedance 3500 Ohm(LI6) switch-configurable PTC probe, 0...6, impedance 1500 Ohm(PWR) safety input, 24 V DC, voltage limits <= 30 V, impedance 1500 Ohm | Pumping and ventilation machine | Asynchronous motorsSynchronous motors | 5...95 % without condensation conforming to IEC 60068-2-35...95 % without dripping water conforming to IEC 60068-2-3 | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 | -25...70 °C | IP54 conforming to EN/IEC 61800-5-1IP54 conforming to UL Type 12IP54 conforming to EN/IEC 60529 | <= 1000 m without derating1000...3000 m with current derating 1 % per 100 m | 1.5 mm peak to peak (f = 3...13 Hz) conforming to EN/IEC 60068-2-61 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-6 | -10...40 °C without derating-10...50 °C with derating factor | 57.4 dB conforming to 86/188/EEC | AI1-/Al1+ +/- 0.6 % for a temperature variation 60 °CAI2 +/- 0.6 % for a temperature variation 60 °CAO1 +/- 1 % for a temperature variation 60 °C | Between power and control terminals | 315 mm | 560 mm | With an IP21 or an IP31 kit: 3-strand IEC cable at 40 °C, copper 70 °C PVCWith UL Type 1 kit: 3-strand UL 508 cable at 40 °C, copper 75 °C PVCWithout mounting kit: 1-strand IEC cable at 45 °C, copper 70 °C PVCWithout mounting kit: 1-strand IEC cable at 45 °C, copper 90 °C XLPE/EPR | No impedance for Modbus | +/- 15 % in open-loop mode, without speed feedback | 8 bits, 1 stop, even parity for Modbus on front face8 bits, odd even or no configurable parity for Modbus on terminal | APOGEE FLN communication cardBACnet communication cardCC-Link communication cardController inside programmable cardDeviceNet communication cardEthernet/IP communication cardFipio communication cardI/O extension cardInterbus-S communication cardLonWorks communication cardMETASYS N2 communication cardModbus Plus communication cardModbus TCP communication cardModbus/Uni-Telway communication cardMulti-pump cardProfibus DP communication cardProfibus DP V1 communication card | 20 kVA for 380 V 3 phases 15 kW / 20 hp | 28 kg | 47.5...63 Hz | ATV61 | 7 | Slave for CANopen | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
 ATV212HD55N4 施耐德(SCHNEIDER) 风泵变频器 Schneider Electric component ATV212HD55N4: variable speed drive ATV212 - 55kW - 75hp - 480V - 3ph - EMC - IP21 施耐德 | - | 22 kA | EN 55011 class A group 1EN 61800-3EN 61800-3 category C2EN 61800-3 category C3EN 61800-3 environments 1 category C1EN 61800-3 environments 1 category C2EN 61800-3 environments 1 category C3EN 61800-3 environments 2 category C1EN 61800-3 environments 2 category C2EN 61800-3 environments 2 category C3EN 61800-5-1IEC 61800-3IEC 61800-3 category C2IEC 61800-3 category C3IEC 61800-3 environments 1 category C1IEC 61800-3 environments 1 category C2IEC 61800-3 environments 1 category C3IEC 61800-3 environments 2 category C1IEC 61800-3 environments 2 category C2IEC 61800-3 environments 2 category C3IEC 61800-5-1UL Type 1 | Class C2 EMC filter integrated | Overheating protection for driveShort-circuit between motor phases for driveOvercurrent between output phases and earth for driveOvervoltages on the DC bus for driveBreak on the control circuit for driveAgainst exceeding limit speed for driveLine supply undervoltage for driveAgainst input phase loss for driveThermal protection for motorMotor phase break for motorInput phase breaks for driveThermal power stage for driveLine supply overvoltage and undervoltage for driveWith PTC probes for motor | CSAC-TickNOM 117UL | +/- 10 % of nominal slip for 0.2 Tn to Tn torque variation | Configurable relay logic: (FLA, FLC) NO - 100000 cyclesConfigurable relay logic: (FLB, FLC) NC - 100000 cyclesConfigurable relay logic: (RY, RC) NO - 100000 cycles | 9600 bps or 19200 bps | 2-wire RS 485 | +/- 0.15 % of maximum value for input (VIA)+/- 0.15 % of maximum value for input (VIB)+/- 0.2 % for output (FM) | Switch-configurable voltage: (VIA) 0...10 V DC - 24 V max - 30000 Ohm - resolution: 10 bitsSwitch-configurable current: (VIA) 0...20 mA - 250 Ohm - resolution: 10 bitsConfigurable voltage: (VIB) 0...10 V DC - 24 V max - 30000 Ohm - resolution: 10 bitsConfigurable PTC probe: (VIB) 0...6 probes - 1500 Ohm | Switch-configurable voltage: (FM) 0...10 V DC - 7620 Ohm - resolution: 10 bitsSwitch-configurable current: (FM) 0...20 mA - 970 Ohm - resolution: 10 bits | 2 ms +/- 0.5 ms (FM) - analog output(s)7 ms +/- 0.5 ms (FLA, FLC) - discrete output(s)7 ms +/- 0.5 ms (FLB, FLC) - discrete output(s)7 ms +/- 0.5 ms (RY, RC) - discrete output(s) | 55 kW | <= power supply voltage | 89 A for 480 V102.7 A for 380 V | 2 | Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC, +/- 5 % - <= 10 A with overload and short-circuit protectionInternal supply: 24 V (21...27 V) DC - <= 200 A with overload and short-circuit protection | 2 | 75 hp | 3 mA at 24 V DC (configurable relay logic) | 0.1 Hz for display unit0.024/50 Hz for analog input | 3535 V DC between earth and power terminals5092 V DC between control and power terminals | 5 A at 250 V AC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R)5 A at 30 V DC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R)2 A at 250 V AC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R)2 A at 30 V DC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R) | 0.5...200 Hz | 8 kHz | 6...16 kHz adjustable8...16 kHz with derating factor | >= 1 MOhm at 500 V DC for 1 minute | Adjustable PI regulator | 2 ms +/- 0.5 ms (F) - discrete input(s)2 ms +/- 0.5 ms (R) - discrete input(s)2 ms +/- 0.5 ms (RES) - discrete input(s)3.5 ms +/- 0.5 ms (VIA) - analog input(s)22 ms +/- 0.5 ms (VIB) - analog input(s) | 127.6 A for 60 s | 120 % of nominal motor torque, +/- 10 % for 60 s | 320 mm | By DC injection | Automatic based on the loadLinear adjustable separately from 0.01 to 3200 s | 1 RJ451 open style | With heat sink | 3 phases | 0.6 N.m (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)41 N.m - 360 lb.in (L1/R, L2/S, L3/T) | APOGEE FLNBACnetLonWorksMETASYS N2Modbus | CE | Variable speed drive | RTU | Altivar 212 | Vertical +/- 10 degree | AdjustableAutomatic whatever the loadNot available in voltage/frequency ratio motor control | 1...247 | Programmable (F) 24 V DC, with level 1 PLC - 4700 OhmProgrammable (R) 24 V DC, with level 1 PLC - 4700 OhmProgrammable (RES) 24 V DC, with level 1 PLC - 4700 Ohm | Pumps and fans in HVAC | Asynchronous motors | 5...95 % without condensation conforming to IEC 60068-2-35...95 % without dripping water conforming to IEC 60068-2-3 | 15 gn for 11 ms conforming to IEC 60068-2-27 | -25...70 °C | IP20 on upper part without blanking plate on cover conforming to EN/IEC 60529IP20 on upper part without blanking plate on cover conforming to EN/IEC 61800-5-1IP21 conforming to EN/IEC 60529IP21 conforming to EN/IEC 61800-5-1IP41 on upper part conforming to EN/IEC 60529IP41 on upper part conforming to EN/IEC 61800-5-1 | <= 1000 m without derating1000...3000 m (limited to 2000 m for the Corner Grounded distribution network) with current derating 1 % per 100 m | 1.5 mm (f = 3...13 Hz) conforming to EN/IEC 60068-2-61 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-8 | -10...40 °C without derating> 40...50 °C with derating factor | 63.7 dB conforming to 86/188/EEC | +/- 0.6 % (VIA) for a temperature variation 60 °C+/- 0.6 % (VIB) for a temperature variation 60 °C+/- 1 % (FM) for a temperature variation 60 °C | Electrical between power and control | 290 mm | 630 mm | IEC cable without mounting kit: 1 wire(s) - 45 °C, copper 90 °C / XLPE/EPRIEC cable without mounting kit: 1 wire(s) - 45 °C, copper 70 °C / PVCUL 508 cable with UL Type 1 kit: 3 wire(s) - 40 °C, copper 75 °C / PVC | No impedance | +/- 15 % | 8 bits, 1 stop, odd even or no configurable parity | Communication card for LonWorks | 76.3 kVA for 380 V | - | - | - | - | - | 1455 W | 47.5...63 Hz | 498 m3/h | Monitoring inhibitableRead device identification (43)Read holding registers (03) 2 words maximumTime out setting from 0.1 to 100 sWrite multiple registers (16) 2 words maximumWrite single register (06) | ATV212 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
 ATV212H075N4 施耐德(SCHNEIDER) 风泵变频器 Schneider Electric component ATV212H075N4: variable speed drive ATV212 - 0.75kW - 1hp - 480V - 3ph - EMC - IP21 Schneider Electric ALTIVAR 212 系列 IP20 0.75 kW 变频器驱动 , 0 → 200Hz, 2.2 A, 380 → 480 V 交流 施耐德 | 12 | 1: ¥3,554.972 | 5 kA | EN 55011 class A group 1EN 61800-3EN 61800-3 category C2EN 61800-3 category C3EN 61800-3 environments 1 category C1EN 61800-3 environments 1 category C2EN 61800-3 environments 1 category C3EN 61800-3 environments 2 category C1EN 61800-3 environments 2 category C2EN 61800-3 environments 2 category C3EN 61800-5-1IEC 61800-3IEC 61800-3 category C2IEC 61800-3 category C3IEC 61800-3 environments 1 category C1IEC 61800-3 environments 1 category C2IEC 61800-3 environments 1 category C3IEC 61800-3 environments 2 category C1IEC 61800-3 environments 2 category C2IEC 61800-3 environments 2 category C3IEC 61800-5-1UL Type 1 | Class C2 EMC filter integrated | Overheating protection for driveShort-circuit between motor phases for driveOvercurrent between output phases and earth for driveOvervoltages on the DC bus for driveBreak on the control circuit for driveAgainst exceeding limit speed for driveLine supply undervoltage for driveAgainst input phase loss for driveThermal protection for motorMotor phase break for motorInput phase breaks for driveThermal power stage for driveLine supply overvoltage and undervoltage for driveWith PTC probes for motor | CSAC-TickNOM 117UL | +/- 10 % of nominal slip for 0.2 Tn to Tn torque variation | Configurable relay logic: (FLA, FLC) NO - 100000 cyclesConfigurable relay logic: (FLB, FLC) NC - 100000 cyclesConfigurable relay logic: (RY, RC) NO - 100000 cycles | 9600 bps or 19200 bps | 2-wire RS 485 | +/- 0.15 % of maximum value for input (VIA)+/- 0.15 % of maximum value for input (VIB)+/- 0.2 % for output (FM) | Switch-configurable voltage: (VIA) 0...10 V DC - 24 V max - 30000 Ohm - resolution: 10 bitsSwitch-configurable current: (VIA) 0...20 mA - 250 Ohm - resolution: 10 bitsConfigurable voltage: (VIB) 0...10 V DC - 24 V max - 30000 Ohm - resolution: 10 bitsConfigurable PTC probe: (VIB) 0...6 probes - 1500 Ohm | Switch-configurable voltage: (FM) 0...10 V DC - 7620 Ohm - resolution: 10 bitsSwitch-configurable current: (FM) 0...20 mA - 970 Ohm - resolution: 10 bits | 2 ms +/- 0.5 ms (FM) - analog output(s)7 ms +/- 0.5 ms (FLA, FLC) - discrete output(s)7 ms +/- 0.5 ms (FLB, FLC) - discrete output(s)7 ms +/- 0.5 ms (RY, RC) - discrete output(s) | 0.75 kW | <= power supply voltage | 1.4 A for 480 V1.7 A for 380 V | 2 | Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC, +/- 5 % - <= 10 A with overload and short-circuit protectionInternal supply: 24 V (21...27 V) DC - <= 200 A with overload and short-circuit protection | 2 | 1 hp | 3 mA at 24 V DC (configurable relay logic) | 0.1 Hz for display unit0.024/50 Hz for analog input | 3535 V DC between earth and power terminals5092 V DC between control and power terminals | 5 A at 250 V AC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R)5 A at 30 V DC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R)2 A at 250 V AC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R)2 A at 30 V DC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R) | 0.5...200 Hz | 12 kHz | 12...16 kHz with derating factor6...16 kHz adjustable | >= 1 MOhm at 500 V DC for 1 minute | Adjustable PI regulator | 2 ms +/- 0.5 ms (F) - discrete input(s)2 ms +/- 0.5 ms (R) - discrete input(s)2 ms +/- 0.5 ms (RES) - discrete input(s)3.5 ms +/- 0.5 ms (VIA) - analog input(s)22 ms +/- 0.5 ms (VIB) - analog input(s) | 2.4 A for 60 s | 120 % of nominal motor torque, +/- 10 % for 60 s | 107 mm | By DC injection | Automatic based on the loadLinear adjustable separately from 0.01 to 3200 s | 1 RJ451 open style | With heat sink | 3 phases | 0.6 N.m (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)1.3 N.m - 11.5 lb.in (L1/R, L2/S, L3/T) | APOGEE FLNBACnetLonWorksMETASYS N2Modbus | CE | Variable speed drive | RTU | Altivar 212 | Vertical +/- 10 degree | AdjustableAutomatic whatever the loadNot available in voltage/frequency ratio motor control | 1...247 | Programmable (F) 24 V DC, with level 1 PLC - 4700 OhmProgrammable (R) 24 V DC, with level 1 PLC - 4700 OhmProgrammable (RES) 24 V DC, with level 1 PLC - 4700 Ohm | Pumps and fans in HVAC | Asynchronous motors | 5...95 % without condensation conforming to IEC 60068-2-35...95 % without dripping water conforming to IEC 60068-2-3 | 15 gn for 11 ms conforming to IEC 60068-2-27 | -25...70 °C | IP20 on upper part without blanking plate on cover conforming to EN/IEC 60529IP20 on upper part without blanking plate on cover conforming to EN/IEC 61800-5-1IP21 conforming to EN/IEC 60529IP21 conforming to EN/IEC 61800-5-1IP41 on upper part conforming to EN/IEC 60529IP41 on upper part conforming to EN/IEC 61800-5-1 | <= 1000 m without derating1000...3000 m (limited to 2000 m for the Corner Grounded distribution network) with current derating 1 % per 100 m | 1.5 mm (f = 3...13 Hz) conforming to EN/IEC 60068-2-61 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-8 | -10...40 °C without derating> 40...50 °C with derating factor | 51 dB conforming to 86/188/EEC | +/- 0.6 % (VIA) for a temperature variation 60 °C+/- 0.6 % (VIB) for a temperature variation 60 °C+/- 1 % (FM) for a temperature variation 60 °C | Electrical between power and control | 150 mm | 143 mm | IEC cable without mounting kit: 1 wire(s) - 45 °C, copper 90 °C / XLPE/EPRIEC cable without mounting kit: 1 wire(s) - 45 °C, copper 70 °C / PVCUL 508 cable with UL Type 1 kit: 3 wire(s) - 40 °C, copper 75 °C / PVC | No impedance | +/- 15 % | 8 bits, 1 stop, odd even or no configurable parity | Communication card for LonWorks | 1.6 kVA for 380 V | 2 kg | - | - | - | - | 55 W | 47.5...63 Hz | 19 m3/h | Monitoring inhibitableRead device identification (43)Read holding registers (03) 2 words maximumTime out setting from 0.1 to 100 sWrite multiple registers (16) 2 words maximumWrite single register (06) | ATV212 | 是 | 0.75 kW | 143mm | ALTIVAR 212 | Apogee P1、BACnet、Metasys N2、Modbus | 是 | 0 → +40°C | - | - | - | - | - | - | - | - | - | - |
 ATV61HD30M3XZ 施耐德(SCHNEIDER) 风泵变频器 Schneider Electric component ATV61HD30M3XZ: variable speed drive ATV61 - 30kW 40HP - 200...240V - IP20 施耐德 | - | 22 kA 3 phases | IEC 60721-3-3 class 3C1IEC 60721-3-3 class 3S2UL Type 1 | Without EMC filter | Drive against exceeding limit speedDrive against input phase lossDrive break on the control circuitDrive input phase breaksDrive line supply overvoltageDrive line supply undervoltageDrive overcurrent between output phases and earthDrive overheating protectionDrive overvoltages on the DC busDrive power removalDrive short-circuit between motor phasesDrive thermal protectionMotor motor phase breakMotor power removalMotor thermal protection | CSAC-TickDNVGOSTNOM 117UL | +/- 10 % of nominal slip for 0.2 Tn to Tn torque variation without speed feedback | (R1A, R1B, R1C) configurable relay logic NO/NC, electrical durability 100000 cycles(R2A, R2B) configurable relay logic NO, electrical durability 100000 cycles | 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus on terminal9600 bps, 19200 bps for Modbus on front face | 2-wire RS 485 for Modbus | AI1-/Al1+ +/- 0.15 % of maximum valueAI2 +/- 0.15 % of maximum valueAO1 +/- 0.2 % | AI1-/Al1+ bipolar differential voltage +/- 10 V DC, input voltage 24 V max, resolution 11 bits + signAI2 software-configurable current 0...20 mA, impedance 242 Ohm, resolution 11 bitsAI2 software-configurable voltage 0...10 V DC, input voltage 24 V max, impedance 30000 Ohm, resolution 11 bits | AO1 software-configurable current, analogue output range 0...20 mA, impedance 500 Ohm, resolution 10 bitsAO1 software-configurable logic output 10 V, <= 20 mAAO1 software-configurable voltage, analogue output range 0...10 V DC, impedance 470 Ohm, resolution 10 bits | <= 100 ms in STO (Safe Torque Off)R1A, R1B, R1C <= 7 ms, tolerance +/- 0.5 msR2A, R2B <= 7 ms, tolerance +/- 0.5 ms | 30 kW 3 phases at 200...240 V | <= power supply voltage | 110 A for 240 V 3 phases 30 kW / 40 hp124 A for 200 V 3 phases 30 kW / 40 hp | 2 | Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <= 10 mA for overload and short-circuit protectionInternal supply 24 V DC (21...27 V), <= 200 mA for overload and short-circuit protectionExternal supply 24 V DC (19...30 V), 30 W | 2 | 40 hp 3 phases at 200...240 V | Configurable relay logic 3 mA at 24 V DC | Analog input 0.024/50 HzDisplay unit 0.1 Hz | 2830 V DC between earth and power terminals4230 V DC between control and power terminals | R1, R2 on resistive load, 5 A at 250 V AC, cos phi = 1, L/R = 0 msR1, R2 on resistive load, 5 A at 30 V DC, cos phi = 1, L/R = 0 msR1, R2 on inductive load, 2 A at 250 V AC, cos phi = 0.4, L/R = 7 msR1, R2 on inductive load, 2 A at 30 V DC, cos phi = 0.4, L/R = 7 ms | 0.1...1000 Hz | 12 kHz | 1...16 kHz adjustable12...16 kHz with derating factor | > 1 mOhm at 500 V DC for 1 minute to earth | Frequency PI regulator | Analog input AI1-/Al1+ 2 ms, +/- 0.5 msAnalog input Al2 2 ms, +/- 0.5 msAnalog output AO1 2 ms, +/- 0.5 msDiscrete input LI1...LI5 2 ms, +/- 0.5 msDiscrete input LI6 (if configured as logic input)2 ms, +/- 0.5 ms | 144 A for 60 s 3 phases | 130 % of nominal motor torque, +/- 10 % for 60 s | 320 mm | By DC injection | Automatic adaptation of ramp if braking capacity exceeded, by using resistorLinear adjustable separately from 0.01 to 9000 sS, U or customized | 1 RJ45 for Modbus on front face1 RJ45 for Modbus on terminalMale SUB-D 9 on RJ45 for CANopen | With heat sink | 3 phases | L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB 41 N.m / 360 lb.inAI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR 0.6 N.m | CANopenModbus | CE | Variable speed drive | RTU for Modbus | Altivar 61 | Vertical +/- 10 degree | AdjustableAutomatic whatever the loadCan be suppressedNot available in voltage/frequency ratio (2 or 5 points) | 1...247 for Modbus1...127 for CANopen | (LI1...LI5) programmable, 24 V DC, voltage limits <= 30 V, with level 1 PLC, impedance 3500 Ohm(LI6) switch-configurable, 24 V DC, voltage limits <= 30 V, with level 1 PLC, impedance 3500 Ohm(LI6) switch-configurable PTC probe, 0...6, impedance 1500 Ohm(PWR) safety input, 24 V DC, voltage limits <= 30 V, impedance 1500 Ohm | Pumping and ventilation machine | Asynchronous motorsSynchronous motors | 5...95 % without condensation conforming to IEC 60068-2-35...95 % without dripping water conforming to IEC 60068-2-3 | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 | -25...70 °C | IP20 on upper part without blanking plate on cover conforming to EN/IEC 60529IP20 on upper part without blanking plate on cover conforming to EN/IEC 61800-5-1IP21 conforming to EN/IEC 60529IP21 conforming to EN/IEC 61800-5-1IP41 on upper part conforming to EN/IEC 60529IP41 on upper part conforming to EN/IEC 61800-5-1IP54 on lower part conforming to EN/IEC 60529IP54 on lower part conforming to EN/IEC 61800-5-1 | <= 1000 m without derating1000...3000 m with current derating 1 % per 100 m | 1.5 mm peak to peak (f = 3...13 Hz) conforming to EN/IEC 60068-2-61 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-6 | -10...50 °C without derating50...60 °C with derating factor | 64 dB conforming to 86/188/EEC | AI1-/Al1+ +/- 0.6 % for a temperature variation 60 °CAI2 +/- 0.6 % for a temperature variation 60 °CAO1 +/- 1 % for a temperature variation 60 °C | Between power and control terminals | 266 mm | 550 mm | With an IP21 or an IP31 kit: 3-strand IEC cable at 40 °C, copper 70 °C PVCWith UL Type 1 kit: 3-strand UL 508 cable at 40 °C, copper 75 °C PVCWithout mounting kit: 1-strand IEC cable at 45 °C, copper 70 °C PVCWithout mounting kit: 1-strand IEC cable at 45 °C, copper 90 °C XLPE/EPR | No impedance for Modbus | +/- 15 % in open-loop mode, without speed feedback | 8 bits, 1 stop, even parity for Modbus on front face8 bits, odd even or no configurable parity for Modbus on terminal | APOGEE FLN communication cardBACnet communication cardCC-Link communication cardController inside programmable cardDeviceNet communication cardEthernet/IP communication cardFipio communication cardI/O extension cardInterbus-S communication cardLonWorks communication cardMETASYS N2 communication cardModbus Plus communication cardModbus TCP communication cardModbus/Uni-Telway communication cardMulti-pump cardProfibus DP communication cardProfibus DP V1 communication card | 45.7 kVA for 240 V 3 phases 30 kW / 40 hp | 37 kg | 47.5...63 Hz | ATV61 | 7 | Slave for CANopen | - | - | - | - | - | - | - | - | - | - | - | - | Without remote graphic terminal | - | - | - | - | - | - | - | - | - | |
 ATV212HD37N4 施耐德(SCHNEIDER) 风泵变频器 Schneider Electric component ATV212HD37N4: variable speed drive ATV212 - 37kW - 50hp - 480V - 3ph - EMC - IP21 施耐德 | - | 22 kA | EN 55011 class A group 1EN 61800-3EN 61800-3 category C2EN 61800-3 category C3EN 61800-3 environments 1 category C1EN 61800-3 environments 1 category C2EN 61800-3 environments 1 category C3EN 61800-3 environments 2 category C1EN 61800-3 environments 2 category C2EN 61800-3 environments 2 category C3EN 61800-5-1IEC 61800-3IEC 61800-3 category C2IEC 61800-3 category C3IEC 61800-3 environments 1 category C1IEC 61800-3 environments 1 category C2IEC 61800-3 environments 1 category C3IEC 61800-3 environments 2 category C1IEC 61800-3 environments 2 category C2IEC 61800-3 environments 2 category C3IEC 61800-5-1UL Type 1 | Class C2 EMC filter integrated | Overheating protection for driveShort-circuit between motor phases for driveOvercurrent between output phases and earth for driveOvervoltages on the DC bus for driveBreak on the control circuit for driveAgainst exceeding limit speed for driveLine supply undervoltage for driveAgainst input phase loss for driveThermal protection for motorMotor phase break for motorInput phase breaks for driveThermal power stage for driveLine supply overvoltage and undervoltage for driveWith PTC probes for motor | CSAC-TickNOM 117UL | +/- 10 % of nominal slip for 0.2 Tn to Tn torque variation | Configurable relay logic: (FLA, FLC) NO - 100000 cyclesConfigurable relay logic: (FLB, FLC) NC - 100000 cyclesConfigurable relay logic: (RY, RC) NO - 100000 cycles | 9600 bps or 19200 bps | 2-wire RS 485 | +/- 0.15 % of maximum value for input (VIA)+/- 0.15 % of maximum value for input (VIB)+/- 0.2 % for output (FM) | Switch-configurable voltage: (VIA) 0...10 V DC - 24 V max - 30000 Ohm - resolution: 10 bitsSwitch-configurable current: (VIA) 0...20 mA - 250 Ohm - resolution: 10 bitsConfigurable voltage: (VIB) 0...10 V DC - 24 V max - 30000 Ohm - resolution: 10 bitsConfigurable PTC probe: (VIB) 0...6 probes - 1500 Ohm | Switch-configurable voltage: (FM) 0...10 V DC - 7620 Ohm - resolution: 10 bitsSwitch-configurable current: (FM) 0...20 mA - 970 Ohm - resolution: 10 bits | 2 ms +/- 0.5 ms (FM) - analog output(s)7 ms +/- 0.5 ms (FLA, FLC) - discrete output(s)7 ms +/- 0.5 ms (FLB, FLC) - discrete output(s)7 ms +/- 0.5 ms (RY, RC) - discrete output(s) | 37 kW | <= power supply voltage | 54.4 A for 480 V68.9 A for 380 V | 2 | Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC, +/- 5 % - <= 10 A with overload and short-circuit protectionInternal supply: 24 V (21...27 V) DC - <= 200 A with overload and short-circuit protection | 2 | 50 hp | 3 mA at 24 V DC (configurable relay logic) | 0.1 Hz for display unit0.024/50 Hz for analog input | 3535 V DC between earth and power terminals5092 V DC between control and power terminals | 5 A at 250 V AC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R)5 A at 30 V DC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R)2 A at 250 V AC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R)2 A at 30 V DC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R) | 0.5...200 Hz | 8 kHz | 6...16 kHz adjustable8...16 kHz with derating factor | >= 1 MOhm at 500 V DC for 1 minute | Adjustable PI regulator | 2 ms +/- 0.5 ms (F) - discrete input(s)2 ms +/- 0.5 ms (R) - discrete input(s)2 ms +/- 0.5 ms (RES) - discrete input(s)3.5 ms +/- 0.5 ms (VIA) - analog input(s)22 ms +/- 0.5 ms (VIB) - analog input(s) | 86.9 A for 60 s | 120 % of nominal motor torque, +/- 10 % for 60 s | 240 mm | By DC injection | Automatic based on the loadLinear adjustable separately from 0.01 to 3200 s | 1 RJ451 open style | With heat sink | 3 phases | 0.6 N.m (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)24 N.m - 212 lb.in (L1/R, L2/S, L3/T) | APOGEE FLNBACnetLonWorksMETASYS N2Modbus | CE | Variable speed drive | RTU | Altivar 212 | Vertical +/- 10 degree | AdjustableAutomatic whatever the loadNot available in voltage/frequency ratio motor control | 1...247 | Programmable (F) 24 V DC, with level 1 PLC - 4700 OhmProgrammable (R) 24 V DC, with level 1 PLC - 4700 OhmProgrammable (RES) 24 V DC, with level 1 PLC - 4700 Ohm | Pumps and fans in HVAC | Asynchronous motors | 5...95 % without condensation conforming to IEC 60068-2-35...95 % without dripping water conforming to IEC 60068-2-3 | 15 gn for 11 ms conforming to IEC 60068-2-27 | -25...70 °C | IP20 on upper part without blanking plate on cover conforming to EN/IEC 60529IP20 on upper part without blanking plate on cover conforming to EN/IEC 61800-5-1IP21 conforming to EN/IEC 60529IP21 conforming to EN/IEC 61800-5-1IP41 on upper part conforming to EN/IEC 60529IP41 on upper part conforming to EN/IEC 61800-5-1 | <= 1000 m without derating1000...3000 m (limited to 2000 m for the Corner Grounded distribution network) with current derating 1 % per 100 m | 1.5 mm (f = 3...13 Hz) conforming to EN/IEC 60068-2-61 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-8 | -10...40 °C without derating> 40...50 °C with derating factor | 64 dB conforming to 86/188/EEC | +/- 0.6 % (VIA) for a temperature variation 60 °C+/- 0.6 % (VIB) for a temperature variation 60 °C+/- 1 % (FM) for a temperature variation 60 °C | Electrical between power and control | 244 mm | 550 mm | IEC cable without mounting kit: 1 wire(s) - 45 °C, copper 90 °C / XLPE/EPRIEC cable without mounting kit: 1 wire(s) - 45 °C, copper 70 °C / PVCUL 508 cable with UL Type 1 kit: 3 wire(s) - 40 °C, copper 75 °C / PVC | No impedance | +/- 15 % | 8 bits, 1 stop, odd even or no configurable parity | Communication card for LonWorks | 52 kVA for 380 V | - | - | - | - | - | 976 W | 47.5...63 Hz | 334 m3/h | Monitoring inhibitableRead device identification (43)Read holding registers (03) 2 words maximumTime out setting from 0.1 to 100 sWrite multiple registers (16) 2 words maximumWrite single register (06) | ATV212 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
 ATV212HD45N4 施耐德(SCHNEIDER) 风泵变频器 Schneider Electric component ATV212HD45N4: variable speed drive ATV212 - 45kW - 60hp - 480V - 3ph - EMC - IP21 施耐德 | - | 22 kA | EN 55011 class A group 1EN 61800-3EN 61800-3 category C2EN 61800-3 category C3EN 61800-3 environments 1 category C1EN 61800-3 environments 1 category C2EN 61800-3 environments 1 category C3EN 61800-3 environments 2 category C1EN 61800-3 environments 2 category C2EN 61800-3 environments 2 category C3EN 61800-5-1IEC 61800-3IEC 61800-3 category C2IEC 61800-3 category C3IEC 61800-3 environments 1 category C1IEC 61800-3 environments 1 category C2IEC 61800-3 environments 1 category C3IEC 61800-3 environments 2 category C1IEC 61800-3 environments 2 category C2IEC 61800-3 environments 2 category C3IEC 61800-5-1UL Type 1 | Class C2 EMC filter integrated | Overheating protection for driveShort-circuit between motor phases for driveOvercurrent between output phases and earth for driveOvervoltages on the DC bus for driveBreak on the control circuit for driveAgainst exceeding limit speed for driveLine supply undervoltage for driveAgainst input phase loss for driveThermal protection for motorMotor phase break for motorInput phase breaks for driveThermal power stage for driveLine supply overvoltage and undervoltage for driveWith PTC probes for motor | CSAC-TickNOM 117UL | +/- 10 % of nominal slip for 0.2 Tn to Tn torque variation | Configurable relay logic: (FLA, FLC) NO - 100000 cyclesConfigurable relay logic: (FLB, FLC) NC - 100000 cyclesConfigurable relay logic: (RY, RC) NO - 100000 cycles | 9600 bps or 19200 bps | 2-wire RS 485 | +/- 0.15 % of maximum value for input (VIA)+/- 0.15 % of maximum value for input (VIB)+/- 0.2 % for output (FM) | Switch-configurable voltage: (VIA) 0...10 V DC - 24 V max - 30000 Ohm - resolution: 10 bitsSwitch-configurable current: (VIA) 0...20 mA - 250 Ohm - resolution: 10 bitsConfigurable voltage: (VIB) 0...10 V DC - 24 V max - 30000 Ohm - resolution: 10 bitsConfigurable PTC probe: (VIB) 0...6 probes - 1500 Ohm | Switch-configurable voltage: (FM) 0...10 V DC - 7620 Ohm - resolution: 10 bitsSwitch-configurable current: (FM) 0...20 mA - 970 Ohm - resolution: 10 bits | 2 ms +/- 0.5 ms (FM) - analog output(s)7 ms +/- 0.5 ms (FLA, FLC) - discrete output(s)7 ms +/- 0.5 ms (FLB, FLC) - discrete output(s)7 ms +/- 0.5 ms (RY, RC) - discrete output(s) | 45 kW | <= power supply voltage | 65.9 A for 480 V83.8 A for 380 V | 2 | Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC, +/- 5 % - <= 10 A with overload and short-circuit protectionInternal supply: 24 V (21...27 V) DC - <= 200 A with overload and short-circuit protection | 2 | 60 hp | 3 mA at 24 V DC (configurable relay logic) | 0.1 Hz for display unit0.024/50 Hz for analog input | 3535 V DC between earth and power terminals5092 V DC between control and power terminals | 5 A at 250 V AC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R)5 A at 30 V DC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R)2 A at 250 V AC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R)2 A at 30 V DC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R) | 0.5...200 Hz | 8 kHz | 6...16 kHz adjustable8...16 kHz with derating factor | >= 1 MOhm at 500 V DC for 1 minute | Adjustable PI regulator | 2 ms +/- 0.5 ms (F) - discrete input(s)2 ms +/- 0.5 ms (R) - discrete input(s)2 ms +/- 0.5 ms (RES) - discrete input(s)3.5 ms +/- 0.5 ms (VIA) - analog input(s)22 ms +/- 0.5 ms (VIB) - analog input(s) | 103.4 A for 60 s | 120 % of nominal motor torque, +/- 10 % for 60 s | 240 mm | By DC injection | Automatic based on the loadLinear adjustable separately from 0.01 to 3200 s | 1 RJ451 open style | With heat sink | 3 phases | 0.6 N.m (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)24 N.m - 212 lb.in (L1/R, L2/S, L3/T) | APOGEE FLNBACnetLonWorksMETASYS N2Modbus | CE | Variable speed drive | RTU | Altivar 212 | Vertical +/- 10 degree | AdjustableAutomatic whatever the loadNot available in voltage/frequency ratio motor control | 1...247 | Programmable (F) 24 V DC, with level 1 PLC - 4700 OhmProgrammable (R) 24 V DC, with level 1 PLC - 4700 OhmProgrammable (RES) 24 V DC, with level 1 PLC - 4700 Ohm | Pumps and fans in HVAC | Asynchronous motors | 5...95 % without condensation conforming to IEC 60068-2-35...95 % without dripping water conforming to IEC 60068-2-3 | 15 gn for 11 ms conforming to IEC 60068-2-27 | -25...70 °C | IP20 on upper part without blanking plate on cover conforming to EN/IEC 60529IP20 on upper part without blanking plate on cover conforming to EN/IEC 61800-5-1IP21 conforming to EN/IEC 60529IP21 conforming to EN/IEC 61800-5-1IP41 on upper part conforming to EN/IEC 60529IP41 on upper part conforming to EN/IEC 61800-5-1 | <= 1000 m without derating1000...3000 m (limited to 2000 m for the Corner Grounded distribution network) with current derating 1 % per 100 m | 1.5 mm (f = 3...13 Hz) conforming to EN/IEC 60068-2-61 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-8 | -10...40 °C without derating> 40...50 °C with derating factor | 64 dB conforming to 86/188/EEC | +/- 0.6 % (VIA) for a temperature variation 60 °C+/- 0.6 % (VIB) for a temperature variation 60 °C+/- 1 % (FM) for a temperature variation 60 °C | Electrical between power and control | 244 mm | 550 mm | IEC cable without mounting kit: 1 wire(s) - 45 °C, copper 90 °C / XLPE/EPRIEC cable without mounting kit: 1 wire(s) - 45 °C, copper 70 °C / PVCUL 508 cable with UL Type 1 kit: 3 wire(s) - 40 °C, copper 75 °C / PVC | No impedance | +/- 15 % | 8 bits, 1 stop, odd even or no configurable parity | Communication card for LonWorks | 61.9 kVA for 380 V | - | - | - | - | - | 1253 W | 47.5...63 Hz | 429 m3/h | Monitoring inhibitableRead device identification (43)Read holding registers (03) 2 words maximumTime out setting from 0.1 to 100 sWrite multiple registers (16) 2 words maximumWrite single register (06) | ATV212 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Page 1 / 6
1