点击放大查看

PMD600

Manufacturer	Macromatic Industrial Controls Inc.
Description	Relay;E-Mech;PhaseMonitor;SPDT,SP-NC;Cur-Rtg10A;Ctrl-V575V;PCBMnt;SMT Phase Monitor Relay Type: Reversal, Loss, Unbalance, Voltage Coil Voltage: 575 V Contact Configuration: 1A + 1B + 1C SPST-NO + SPST-NC + SPDT Mounting: Surface-Mount Contact Current: 10 Amps
Category	工业电源组件和继电器时间延迟继电器定时器和控制器

对参数有疑问？问 AI 助手

合规参数

标准

cULus,CE

防护类型

n/a

重量（负载）	Less than 3VA	复位	As standard, reset is automatic upon correction of fault. When a momentary-contact N.C. switch is wired across the Manual Reset terminals (5 & 6), the unit switches to manual reset mode and remote manual reset is available.
电压	Fixed at 110% of nominal voltage. Unit trips when the average of all three lines is greater than the fixed set point for a period longer than the time delay drop-out.	指示器	See Datasheet
迟滞	2 - 3%	回波损耗	Unit trips on loss of any Phase A, B or C
UL电压	Adjustable from 80-95% of nominal voltage. Unit trips when the average of all three lines is less than the adjusted set point for a period longer than the adjustable time delay drop-out.	响应时间	See Datasheet
额定电压	240⁄30VAC⁄VDC	输出电流	10 Amp
供电电压	575 V	最大额定电流	10A
峰值反向电压（最大）	Unit trips if rotation (sequence) of the three phases is anything other than A-B-C	阻抗 - 不平衡/平衡	Adjustable from 2 - 10% unbalance. Unit trips when any one of the three lines deviates from the average of all three lines by more than the adjusted set point . There is also a 'Disable' setting adjustment that will turn off the Phase Unbalance Protection
驱动电压（最大Rds On，最小Rds On）	575V

端接方式	SMT	触点形式	SPDT,SP-NC
安装类型	Does not require a socket. Can either be mounted directly on 35mm DIN track with no additional parts or to a back-panel with two screws.	安装样式	SMD
触点数	SPDT & SPNC, N.O.: 10A Resistive @ 240V AC/30V DC, 1/2HP @ 240V AC, N.C.: 10A Resistive @ 240V AC/30V DC, 1/3HP @ 240 VAC	典型触点布局	1A + 1B + 1C SPST-NO + SPST-NC + SPDT

温度

-28° to 65°C (-20° to 150°F)

机械寿命

Mechanical: 10,000,000 operations, Full Load: 100,000 operations