点击放大查看

TR-60221

Manufacturer	Macromatic Industrial Controls Inc.
Description	Relay;OnDelay;10A;0.1sec.to2hrs.;240VAC Time Delay Relay Time Ranger Programmable Multi-Range Type:Single Knob Unit Function: On Delay Input Voltage: 240 VAC Timing Range: 0.1 sec - 120 min Mounting : Plug-in 8 Pin Octal Contact Configuration: DPDT
Category	工业电源组件和继电器固态继电器机电继电器

对参数有疑问？问 AI 助手

电气参数

重量（负载）	2 VA	精度	> 2 Seconds Delay +0.1% 0.1 - 2 Seconds Delay +2%
复位时间	On Delay/Interval/Repeat Cycle/Delayed Interval: 0.1 Seconds, Off Delay/Single Shot/Watchdog/Triggered Delayed Interval: 0.04 Seconds	定时器类型	OnDelay
量程（°/s）	0.1 sec - 120 min	额定功率	2VA
额定电压	240 VAC	输出电流	10 Amp
供电电压	AC Operation: +10/-15% of nominal at 50/60 Hz. DC Operation: +10/-15% of nominal.	最大额定电流	10A
触点电压（最大）	2,000 volts	最小输入电压	240VAC

触点形式	DPDT	安装类型	8 Pin Octal
安装样式	Socket	引脚数	8
触点数	DPDT 10A @ 240V AC/28V DC, 1/2HP @ 240V AC, 1/3HP @ 120V AC B300 & R300; AC15 & DC13	典型触点布局	2C DPDT
初始操作力	(Time from when power is applied until unit is timing) 120 & 240V units 0.05 Seconds 12, 24 & 48V units 0.08 Seconds

类型	Single Knob Unit	功能	Timing
继电器类型	ElectroMechanical	触发类型	Timing sequence must be initiated only after input voltage is applied to unit. Minimum required trigger switch closure time is 0.1 seconds.
卡标准	Delay on Make	兼容性	On all units triggered by input voltage or by a control switch, do not use a solid state switch to initiate the timing sequenceproblems with leakage current could occur. On all units with a power trigger, do not use a solid state switch with leakage curre

温度	12-120V Input Voltage: -28° to 65°C (-18° to 150°F) 240V Input Voltage: -28° to 50°C (-18° to 122°F)	动作时间	(Time unit continues to time after power is removed) 0.01 Seconds for all units
机械寿命	Mechanical: 10,000,000 operations Full Load: 100,000 operations