点击放大查看
1-1462038-6
| Category |
对参数有疑问？问 AI 助手
Business
| Standard Pack | 1,000 | Standard Package | Bulk |
Compliance
| RoHS | Compliant | Rad Hardened | No |
| Leadfree Defin | Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C | Approved Countries | CECC Approved, CSA Certified, IEC60950, UL Recognized, UL1950 |
| RoHS/ELV Compliance | Converted to comply with RoHS directive | FCC Part 68 Isolation | Yes |
Electrical
| VSWR | 1.07 @ 100MHz, 1.45 @ 900MHz | Current | 2 Amps |
| Coil Type | Non Latching | Core Type | Polarized, Monostable |
| Isolation | -18.8dB @ 900MHz, -37dB @ 100MHz | Coil Power | 140mW |
| Power - Max | 60 W | Coil Current | 11.67 mA |
| Coil Voltage | 12V | Release Time | 3ms |
| Power - Input | 140 | Power - Rated | 60W/62.5VA |
| Isolation Type | 1800V rms | Power - Output | 50 – 300 mW |
| Visible Output | No | Voltage Rating | 220 V |
| Coil Resistance | 1.029 KOhm | Current - Surge | 2 |
| Voltage - Supply | 12 V | Switching Voltage | 250V ac |
| Contact Resistance | 50mΩ | Power - Peak Pulse | 62.5 VA |
| Switching Capacity | 60W, 62.5VA | Vgs(th) (Max) @ Id | 1.2 VDC |
| Voltage - Rated AC | 250V | Connector Impedance | 2 Form C (CO) |
| Current - Switching | 2 A | Current - Trip (It) | 2 |
| Current Rating - DC | 60 W | Diode Configuration | No |
| Voltage - Breakdown | 1800 | Current Rating (Max) | 2 A |
| Frequency - Output 1 | 单稳态，直流 | Insertion Loss (Max) | -.03dB @ 100MHz, -.33dB @ 900MHz |
| Power - Output Surge | 62.5 VA | Current - Max/Contact | 2A |
| Insulation Resistance | 1800 | Voltage - Input (Min) | 250 V |
| Voltage - Switching AC | 250V 交流 | Voltage - Switching DC | 220V dc |
| Vce(on) (Max) @ Vge, Ic | 9 VDC | Contact Rating (Current) | 2 A |
| Current - Output Source/Sink | .1mA @ .0001V | Current - Peak Pulse (8/20us) | 2 A |
| Resistance - Initial (Ri) (Min) | 1000000 | Voltage - DC Reverse (Vr) (Max) | 220V |
| Current - Discharge (Max) (8/20uS) | 2 | High Side Voltage - Max (Bootstrap) | 9VDC |
| Voltage - Anode - Cathode (Vak)(Max) | 250 | AC contacts rating (at resistance load) | 0.5 A / 125 VAC |
| DC contacts rating (at resistance load) | 2 A / 30 VDC | ||
Mechanical
| Seal | Unsealed | Depth | 5.7mm |
| Width | 5.7 mm [ .224 in ] | Height | 5.8mm |
| Length | 10mm | Weight | 1.37 g |
| Packaging | Tube | Insulation | 端子和线圈间 2500 V 初始浪涌耐受电压 |
| Size - Body | 10 x 5.7 x 5.8mm | Termination | Through Hole |
| Contact Form | 2 Form C | Contact Type | Bifurcated |
| Pitch - Post | 2.2mm | Actuator Type | DC |
| Mounting Type | Through Hole | Terminal Type | Through Hole |
| Mounting Style | Through Hole | Package / Case | DIP |
| Width - Overall | 0 – 6 mm | Contact Material | Palladium Ruthenium/Gold |
| Length - Overall | 10 mm | Size / Dimension | see |
| Outline L x W x H | 10.00 x 5.70 x 5.85 [.394 x .224 x .230] | Pin Hole Diameter | DIP |
| Termination Style | PC Pin | Dimensions - Panel | 10 x 5.7 x 5.8 mm [ .393 x .236 x .228 in ] |
| Number of Contacts | 2 | Dielectric Material | 1500 V – 2500 VA |
| Insulation Material | 1.8kV rms | Number of Positions | 8 |
| Height - Seated (Max) | 0 – 6 mm | Contact Layout, Typical | DPDT |
| Supplier Device Package | n/a | ||
Product Info
| Note | Delivered in sticks | Type | Signal Relay |
| Option | Bellcore GR1089 | Features | Sealed - Hermetically |
| Function | Single Side Stable | Polarity | Yes |
| Relay Type | Non-Latching | Application | 汽车，电信 |
| Performance | 标准 | Product Type | 继电器 |
| Push-to-Test | No | Card Standard | Signal Relay |
| Relay Variant | subminiature, signal | Number of Units | 1 |
| Other Specifications | 短 THT 插针 | Output Configuration | see |
| Application Specifics | Automotive, Telecommunications | Contacts Configuration | DPDT |
Environmental
| Operate Time | 1 ms | Mechanical Life | 100000000cycles |
| Ingress Protection | IP67 | Operating Temperature | -40 to 85 °C |
| Maximum Temperature Limit | +85°C | Initial Dielectric Strength | 1000 |