
点击放大查看
TPS79425DGNT
| Manufacturer | |
| Description | LDO Regulator Pos 2.5V 0.25A 8-Pin HTSSOP EP T/R LDO Regulator Pos 2.5V 0.25A 8-Pin HVSSOP EP T/R IC REG LDO 2.5V 0.25A 8MSOP TPS79425DGNT, Low Dropout Voltage Regulator, 0.25A, 2.5V ±3%, 2.7 to 5.5Vin, 2.6W, 8-Pin HTSSOP EP LDO Voltage Regulators High PSRR Fast RF High-Enable 250-mA V REG LDO 0.25A +2.5V, SMD, 79425 Single Output LDO, 250mA, Fixed(2.5V), High PSRR, Low Noise |
| Category |
Business
| Other Names | 296-14432-2 | Product Category | LDO Voltage Regulators |
| Standard Package | Tape & Reel | Factory Pack Quantity | 250 |
Compliance
| RoHS | Lead free / RoHS Compliant | SVHC | :No SVHC (20-Jun-2013) |
| EU RoHS | Compliant | Tariff No | 85423990 |
| Part Status | :79425 | Rad Hardened | No |
Electrical
| PSRR | 38 | Noise | 32 |
| Output | 1 | Accuracy | ±3 % |
| Output Type | Fixed | Power - Rated | 2600 W |
| Regulator Type | Linear | Voltage Rating | 2.7 V |
| Line Regulation | 0.05(Typ) %/V | Load Regulation | 10(Typ) mV |
| Current - Output | 0.25 A | Voltage - Supply | 0.145@250mA V |
| Number of Outputs | 1 | Regulator Topology | Positive Fixed |
| Capacitance @ Vr, F | Ceramic | Current Rating (Max) | Catalog |
| Number of Regulators | 1 | Voltage - Input (Min) | 2.5V |
| Voltage - Supply (Min) | :3% | Output Voltage Accuracy | �3 % |
| Power Dissipation (Max) | 2600 mW | Current - Quiescent (Iq) | 0.17 |
| DC Voltage - Input (Min) | 2.7 V | Current - Quiescent (Max) | 0.22 mA |
| Voltage Regulation - Load | 3 % | Current - Input Bias (Max) | 0.17 mA |
| Common Mode Transient Immunity (Min) | Extended | Voltage - Continuous Operating (Max) (MCOV) | :5.5V |
Mechanical
| Width | 3.1(Max) | Weight | 0.000670 oz |
| Packaging | Tape and Reel | Lead Style | Gull-wing |
| Termination | :SMD | Mounting Type | Surface Mount |
| Mounting Style | SMD/SMT | Number of Pins | :8 |
| Package / Case | 8HTSSOP EP | Package Cooled | HTSSOP EP |
| Material Finish | :MSL 1 - Unlimited | Length - Overall | 3.1(Max) |
| Package Quantity | HVSSOP EP | Number of Positions | 8 |
| Shell Size - Insert | 0.95(Max) | Supplier Device Package | 8-MSOP-PowerPad |
Product Info
| Type | LDO | Series | TPS79425 |
| Features | Current Limit|Thermal Protection | Polarity | Positive |
| Software | SLVS349E | Topology | LDO |
| Base Unit | :79425 | Pattern Number | Y |
| Outputs and Type | Fixed Output | Utilized IC / Part | View |
| Output Configuration | 2.5 | Printed Circuit Board | 8 |
Environmental
| Temperature - Test | -40 to 85 | Operating Temperature | -40 to 125 °C |
Documents & Media
Similar Parts

TPS54610PWP
texas instruments
Conv DC-DC Single Step Down 3V to 6V 28-Pin HTSSOP EP Tube IC REG BUCK SYNC ADJ 6A 28HTSSOP TPS54610PWP, Switching Regulator, Buck Controller, 6A, Adjustable, 0.9V min., 762kHz, 28-Pin HTSSOP EP Voltage Regulators - Switching Regulators 6A Sync Buck Converter BUCK PWM REG, FET ADJ, SMD, 54610 3V to 6V Input, 6A Synchronous Step-Down SWIFT™ Converter Logic IC Synchronous / Switch HTSSOP-28, TPS54610, TPS54610PWP, Texas Instruments Texas Instruments 降压 开关稳压器, 6A, 可调输出, 最低 0.9 V, 762 kHz, 28针 HTSSOP封装 Switching Voltage Regulators 6A Sync Buck Converter

744728
Wurth Electronics
Inductor Kits & Accessories TI Design Kit DESIGN KIT INDUCTORS FOR TI Wurth Elektronik Power Inductor Inductor Design Kit, 176 Pieces DESIGN-KIT SMD-POWER CHOKES FOR TI Wurth Elektronik 176件 电感器套件, 套件包含功率电感器
XILINXPWR-083
texas instruments
XILINXPWR-083 xilinxpwr-083 EVAL MODULE FOR XILINX FPGA Power Management IC Development Tools Pwr Mgmt Eval Mod Xilinx
XILINXPWR-079
texas instruments
Power Management Evaluation Module Power Management IC Development Tools Pow Mgt Eval Mod for Xilinx FPGAs EVAL MODULE FOR XILINX FPGA

RE903
Roth Elektronik
RE903, Surface Mount (SMT) Board MSOP Epoxy Glass Double-Sided 16.2 x 10.4 x 1.5mm FR4 MSOP-8SMDadaptorboard,FR4RE903 Board: universal; multiadapter; W:16.2mm; L:10.4mm; MSOP8 Laboratory card FR4 Epoxide + chem. Ni/Au, RE903, Roth Elektronik

631954
STANNOL
SOLDER WIRE, 95.5/3.8/0.7, 0.5MM, 250G

ICK SMD A 10 SA
FISCHER ELEKTRONIK
HEAT SINK, FOR SMD, 75°C/W Heat sink 10 mm 75 K/W black anodised, ICK SMD A 10 SA, Fischer Elektronik

