点击放大查看
8513340000
| Manufacturer | |
| Description | Current Monitoring 9-Pin CONDITIONER SIGNAL RAIL MNT |
| Category |
对参数有疑问？问 AI 助手
Business
| Other Names | WAS2CMR20/40/60AAC | Standard Package | Bulk |
Compliance
| RoHS | Lead free / RoHS Compliant | Standards | DIN EN 50178 |
| IEC 61000-4-2 | EN 55011, EN 61000-6 | Standard Number | 30-21-18-01 |
| Declaration of Conformity | Declaration of Conformity | ||
Electrical
| Sensor | Hall sensor (internal) | Frequency | 50...60 Hz |
| Indicator | Green LED | Isolation | 3-way isolator |
| Hysteresis | 5 % or 10 % of threshold value | Range deg/s | 0.5 mm² |
| Response Time | typ. 700 ms | Settling Time | 0...40 A / 10 % hysteresis / open-circuit principle |
| Voltage - Max | 400 V AC, > 400 V AC depends on conductor insulation | Current - Test | 3 A |
| Voltage Rating | 300 V | Current - Carry | ≤ 2 A |
| Number of Inputs | 1 | Switching Energy | Adjustable 10...100% with front potentiometer |
| Voltage - Supply | 24 V DC ± 10 % | Number of Outputs | 1 |
| Current - Switching | 7 A | Voltage - Breakdown | 4 kVeff / 5 s |
| Current - Input Bias | 0...20 A AC/ 0...40 A AC/ 0...60 A AC | Current Rating (Max) | Depends on wire cross-section |
| Ratio - Input:Output | 20/ 40/ 60 A AC / relay | Voltage - Open Circuit | 400 VAC, > 400 VAC depending on wire insulation |
| Voltage - Switching AC | 250 V | Voltage - Switching DC | 6 V |
| Current - Average Rectified (Io) | 23 mA (relay not triggered)/ 47 mA (relay triggered) | Impulse Discharge Current (8/20us) | 4 kV |
Mechanical
| Depth | 112.4 mm | Width | 22.5 mm |
| Length | 92.4 mm | Weight | 144 g |
| Termination | Screw connection | Cable Diameter | 8 mm |
| Connector Type | Screw connection | Depth (Inches) | 4.425 inch |
| Mounting Rails | TS 35 | Width (Inches) | 0.886 inch |
| Length (Inches) | 3.638 inch | Package Quantity | instruction sheet.pdf |
Product Info
| Type | WAS2 CMR 20/40/60A ac | Series | * |
| ETIM 6*0 | EC002048 | Function | Open-circuit/closed-circuit principle |
| GTIN (EAN) | 4032248151707 | Description | Cross-connector for power supplies and markers – refer to Accessories |
| Product Type | 1510390000 | Configuration | DIP switch, Potentiometer |
| Specifications | Limit-value monitoring component for AC currents up to 60A with relay output and electrical isolationlimit-value monitoring component in 22.5 mm width for recording 50/ 60 Hz AC currents 0...20 A / 0...40 A / 0...60 A. A relay contact (CO) with a switching capacity of 750 VA is available on the output side. Input range can be selected using DIP switches. Switching threshold adjustable between 10...90 % using the front-side potentiometer. The 24 VDC power is supplied over the input circuit. The input and output have 4 kV of electrical isolation. | Firmware Version | WAVESERIES, Current monitoring, 0...20 A AC/ 0...40 A AC/ 0...60 A AC, 1, 1, Screw connection |
| Other Specifications | This article will no longer be available in the future. | ||
Environmental
| Distance | ≥ 3 mm | ET (Volt-Time) | EC001440 |
| Operational Life | 533 Years | Ingress Protection | 2 |
| Operating Temperature | 0 to 50 °C | Temperature Coefficient | ≤ 250 ppm/K |
Documents & Media
PDF Document