点击放大查看
8540300000
| Manufacturer | |
| Description | Signal Converter/Disconnector 12-Pin CONDITIONER SIGNAL DINRAIL MNT |
| Category |
对参数有疑问？问 AI 助手
商业参数
| 其他名称 | WAZ5 VCC 0-10V/4-20M | 标准包装数量 | Bulk |
合规参数
| RoHS | Lead free / RoHS Compliant | 标准 | DIN EN 50178, DIN EN 61000-4-2 |
| IEC标准 | 27-21-01-20 | IEC 61000-4-2 | EN 55011, EN 61000-6 |
| 标准编号 | 31-12-10-07 | 符合性声明 | Declaration of Conformity |
电气参数
| 精度 | 0.2 % | 频率 | 27-21-01-20 |
| 隔离 | 3-way isolator | 量程（°/s） | 0.5 mm² |
| 负载电流 | ≤ 600 Ω | 响应时间 | ≤ 45 ms |
| 额定电压 | 0...10 V | 承载电流 | ≤ 2 A |
| 输出电流 | 4...20 mA | 输入数量 | 1 |
| 供电电压 | 24 V DC ± 25 % | 输出数量 | 1 |
| 输入电阻 | typ. 100 kΩ | 击穿电压 | 2 kVeff / 5 s |
| 频率 - 输出3 | 10 Hz | 输入输出比 | 0...10 V/ 4...20 mA |
| 最小输入电压 | 4 kVeff / 1 min. | 平均正向功率 | < 1.5 W @ IOUT = 20 mA |
| 输出供电电压 | 2 kVeff / 5 s | 冲击放电电流 (8/20µs) | 4 kV |
机械参数
| 深度 | 112.4 mm | 宽度 | 17.5 mm |
| 长度 | 92.4 mm | 重量 | 101.1 g |
| 连接器类型 | Tension clamp connection | 深度（英寸） | 4.425 inch |
| 安装导轨 | TS 35 | 宽度（英寸） | 0.689 inch |
| 长度（英寸） | 3.638 inch | 包装数量 | instruction sheet.pdf |
| 剥线长度（范围） | 7 mm | ||
产品信息
| 类型 | WAZ5 VCC 0-10V/4-20MA | 系列 | * |
| ETIM 6*0 | EC002653 | GTIN（EAN） | 4032248180684 |
| 描述 | Cross-connectors for power supplies and markers: refer to accessories | 配置 | none |
| 规格说明 | Standard signal isolating converter1-channel signal isolating converter in 17.5 mm width, with external power supply,to transmit and isolate analogue DC current signals from 0 to 10 VAdd-on housing for TS35 rail mountingDimensions: L/W/H 92.4/ 17.5/ 112.4 mmTension-clamp connection / Nominal cross-section 1.5 mm2Protection degree: IP 20 Input 0...10 VOutput 4...20 mATransmission error < 0,2% v. E. Limit frequency 10 HzAuxiliary power 24 VDC +/- 25 %Power loss approx. 1.3 WAmbient temperature range 0 °C...+55 °CSecure isolation EN 50178, 3-way isolation up to 4 kV AC/DC of all circuits against each otherTest voltage 4 kV input against output against auxiliary powerRated voltage 300 V AC/DC at overvoltage category III and pollution degree 2Approvals cULusType WAZ5 VCC 0-10/4-20MA | 工程数据 | EPLAN |
| 固件版本 | Signal converter/insulator, Tension clamp connection | 其他规格 | III |
环境参数
| 距离 | ≥ 3 mm | ET（伏秒积） | EC001774 |
| 防护等级 | 2 | 工作温度 | 0 to 55 °C |
| 温度系数 | ± 250 ppm/K | ||
Documents & Media
PDF Document