- Home
- Manufacturer
- Weidmüller Holding AG & Co. KG
Data Acquisition Switch Systems Accessories
Weidmüller Holding AG & Co. KG- Data Acquisition Switch Systems Accessories
03
Data Acquisition Switch Systems Accessories - 型号列表
11 parts in total| Mfr Part # | Quantity Available | Price | Standard Package | RoHS | Frequency | Weight | Type | ETIM 6*0 | GTIN (EAN) | Ingress Protection | Series | ET (Volt-Time) | Width | Height | Width (Inches) | Height (Inches) | Firmware Version | Standards | IEC Standard | IEC 61000-4-2 | Declaration of Conformity | Accuracy | Range deg/s | Current - Output | Voltage - Supply | Voltage - Input (Min) | Connector Type | Descriptive Text Technical Data | Operating Temperature | Temperature Coefficient | Standard Number | Length | Safety Category | Approval Agency Marking | Sensor | Isolation | Load Current | Response Time | Voltage Rating | Number of Outputs | Voltage - Breakdown | Current - Input Bias | Frequency - Output 3 | No Load Power Consumption | Depth | Wire Gauge | Depth (Inches) | Mounting Rails | Package Quantity | Description | Product Type | Configuration | Specifications | Engineering Data | Other Specifications | Temperature | Humidity Range | Tool Type | For Use With/Related Products | Length (Inches) | Approval Agency | Current - UL | Current Rating (Max) | Current - Input Bias (Max) | Mounting Type | Size / Dimension | Termination Style | Features | Maximum Temperature Limit | Operate Time | Output | Visible Output | Output Resolution | Analog Input:Output | Voltage/Current - Output 1 | Voltage - Output (Typ) @ Distance | Adjustment Range | Manual Override |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | 10 | 1: ¥2,520.352 | 1 | Lead free / RoHS Compliant | 27-20-11-09 | 417 g | IE-CT | EC000305 | 4032248506002 | 27-20-11-09 | - | EC000305 | 70 mm | 36 mm | 2.756 inch | 1.417 inch | Continuity tester for data cables | - | - | - | - | - | - | - | - | - | - | - | - | - | 41-11-36-37 | 140 mm | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Continuity Tester | Multiple Cables | 5.512 inch | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 | 10 | 1: ¥4,409.80 | 1 | Lead free / RoHS Compliant | - | - | - | - | - | - | * | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| 10 | 1: ¥4,409.80 | 1 | Lead free / RoHS Compliant | - | - | - | - | - | - | * | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 | 10 | 1: ¥346.188 | 1 | Lead free / RoHS Compliant | 27-24-26-92 | 63 g | SAI-ASI T FF | EC002585 | 4032248566105 | 27-27-92-12 | * | EC002585 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 30-21-18-01 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 | 10 | 1: ¥369.376 | 1 | Lead free / RoHS Compliant | 27-24-26-92 | 85 g | SAI-ASI T FR | EC002585 | 4032248566211 | 27-27-92-12 | * | EC002585 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 30-21-18-01 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 | 10 | 1: ¥2,417.876 | 1 | Lead free / RoHS Compliant | 27-21-09-90 | 348 g | P275 | EC001417 | 4032248565801 | 27-21-09-90 | - | - | 62 mm | 112 mm | 2.441 inch | 4.409 inch | PM, Calibration device | DIN EN 50178 | 27-21-92-90 | DIN EN 61326 | Declaration of Conformity | 0.25 % of signal range | 0.5 mm² | 0 (4)...20 mA | Batteries, 2 x 9-V blocks 6...22 mA (current source)2 mA (current sink) | 0...5 V / 1...5 V; 0...200 mV / 40...200 mV | Socket | Including two one-metre-long test leads sw/rt with banana plug/terminal and one bridge lead | 0 °C...60 °C | typ. 40 ppm @ °C | 30-21-18-01 | 31 mm | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Calibrator | Sound Levels | 1.22 inch | - | - | - | - | - | - | - | - | - | - | 0 or 100 % with toggle switch | 0...100 % with precision potentiometer | 0.01 mA | < 1 µA | 4...45 V DC | 250 Ω @ V / 10 Ω @ mV | 0 (4)...20 mA / 0...200 mA (current source).0...5 V (voltage source) or as current sinkselectable with toggle switch | Quick start guide, english |
| 10 | 1: ¥6,624.628 | 1 | Lead free / RoHS Compliant | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Calibrator | Sound Levels | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 1176040000 Signal Isolator/ Splitter (2-Wire System) Is Supplied Via The Output Current Loop And Has An Analogue DC Current Input SIGNAL CONVERTER/DISCONNECTOR DIN Rail 接口继电器模块, 4 → 20mA Weidmuller | 10 | 1: ¥1,268.744 | 1 | Conform | 100 Hz | 80 g | ACT20M-CI-CO-OLP-S | EC002653 | 4032248970155 | 2 | * | EC002479 | 6.1 mm | 112.5 mm | 0.24 inch | 4.429 inch | Signal converter/insulator, Output current loop powered, 2-way isolator, Output loop powered | IEC 61010-1 | 27-21-01-20 | IEC 61326-1, NE 21 | Declaration of Conformity | < 0.05 % of measuring range | 0.5 mm² | 4...20 mA | Output loop powered | Typical 2.5 V | Screw connection | Power supply optionally over the DIN mounting rail CH20M | -25 °C...70 °C | ≤±0.02 µA x (Δ °C x V supply) @ Tamb > 25 °C | - | 6.1mm | KEMA10ATEX0183X | IECEXKEM10.0090X | Current source | 2-way isolator | ≤ 600 Ω (channel 1 +2), @ max 23mA | ≤ 5 ms | 300 Veff | 1 | 2.5 kVeff / 1 min. | 4…20mA | 100 Hz | 30 mW per channel | 114.3 mm | 2.5 mm² | 4.5 inch | TS 35 | instruction sheet.pdf | DIN mounting rail, see Accessories | The passive isolator ACT20M-CI-CO-OLP-S isolates standard analogue current signals. An analogue input current signal is linearly converted into an analogue output current signal and is galvanically isolated. Power is supplied through the output measuring circuit (output loop-powered). | none | Standard signal isolating amplifier1-channel signal isolating amplifier in 6.1 mm width output-loop powered,for transmitting and isolating analogue DC current signals 0/4...20 mA.Add-on housing for TS35 rail mountingDimensions: L/W/H 114.3/ 6.1/ 112.5 mmScrew connection / Nominal cross-section 2.5 mm2Protection degree: IP 20 Input 0/4...20 mAOutput 0/4...20 mALoad resistance < 600 OhmTransmission error < 0,1 % v. E. Limit frequency 100 HzAuxiliary power 0/4...20 mA output current loopPower loss approx. 0.9 WAmbient temperature range -25 °C...+70 °C Isolation EN 61010-1, 2-way isolation up to 2.5 kV AC/DCTest voltage 2.5 kV input against output against auxiliary powerRated voltage 300 V AC/DC at overvoltage category II and pollution degree 2Approvals cULus, FM Div2, ATEX Zone2, DNV, GLType ACT20M-CI-CO-OLP-S | EPLAN | Typical 2.5 V | -25 °C...+70 °C | 40 °C / 93 % rel. humidity, no condensation | - | - | - | ATEX-KEMA，cULus，DNV，EAC，FM 认证，IECEx-KEMA，ME25 | E337701.pdf | 4 → 20mA | 4 → 20mA | DIN Rail | 6.1 x 114.3 x 112.5mm | 螺丝 | 切断频率高达 100 Hz，无源隔离器，步进响应时间 ≤5 ms | +70°C | - | - | - | - | - | - | - | - | - |
| 10 | 1: ¥1,146.684 | 1 | Conform | 100 Hz | 80 g | ACT20M-CI-CO-ILP-S | EC002653 | 4032248970148 | 2 | * | EC002479 | 6.1 mm | 112.5 mm | 0.24 inch | 4.429 inch | Signal converter/insulator, Input current loop feed, 2-way isolator, Loop powered, via 4...20 mA input | IEC 61010-1 | 27-21-01-20 | IEC 61326-1, NE 21 | Declaration of Conformity | < 0.1 % of measuring range | 0.5 mm² | 0...20 mA, 4...20 mA | Loop powered, via 4...20 mA input | 1.25 V + 0.015 Vout @25°C | Screw connection | Power supply optionally over the DIN mounting rail CH20M | -25 °C...70 °C | ≤ 0.01 % / °C | - | 6.1mm | KEMA10ATEX0183X | IECEXKEM10.0090X | Current source | 2-way isolator | ≤ 600 Ω (channel 1 +2), @ max 23mA | ≤ 5 ms | 300 Veff | 1 | 2.5 kVeff / 1 min. | 0...20 mA, 4…20mA | 100 Hz | 30 mW per channel | 114.3 mm | 2.5 mm² | 4.5 inch | TS 35 | instruction sheet.pdf | DIN mounting rail, see Accessories | The ACT20M-CI-CO-ILP-S passive isolator isolates standard analogue current signals.An analogue input current signal is linearly converted to an analogue output current signal and is galvanically isolated. Power is supplied through the input measuring circuit (input loop-powered). | none | Standard signal passive isolator1-channel passive isolator in 6.1 mm width input-loop powered,for transmitting and isolating analogue DC current signals 0/4...20 mA.Add-on housing for TS35 rail mountingDimensions: L/W/H 114.3/ 6.1/ 112.5 mmScrew connection / Nominal cross-section 2.5 mm2Protection degree: IP 20 Input 0/4...20 mAOutput 0/4...20 mALoad resistance < 600 OhmTransmission error < 0,1 % v. E. Limit frequency 100 HzAuxiliary power 0/4...20 mA input current loopPower loss approx. 0.9 WAmbient temperature range -25 °C...+70 °C Isolation EN 61010-1, 2-way isolation up to 2.5 kV AC/DCTest voltage 2.5 kV input against output against auxiliary powerRated voltage 300 V AC/DC at overvoltage category II and pollution degree 2Approvals cULus, FM Div2, ATEX Zone2, DNV, GLType ACT20M-CI-CO-ILP-S | EPLAN | <1.25 V | -25 °C...+70 °C | 40 °C / 93 % rel. humidity, no condensation | - | - | - | ATEX-KEMA，cULus，DNV，EAC，FM 认证，IECEx-KEMA，ME25 | - | 0 → 20 mA, 4 → 20 mA | 4 → 20mA | DIN Rail | 6.1 x 114.3 x 112.5mm | 螺丝 | 切断频率高达 100 Hz，无源隔离器，步进响应时间 ≤5 ms | +70°C | 699 Years | - | - | - | - | - | - | - | - |
| 10 | 1: ¥1,834.504 | 1 | Conform | 100 Hz | 96 g | ACT20M-2CI-2CO-OLP-S | EC002653 | 4032248969999 | 2 | * | EC002479 | 6.1 mm | 112.5 mm | 0.24 inch | 4.429 inch | Signal converter/insulator, dual channel, Output current loop powered, 2-way isolator, Output loop powered | IEC 61010-1 | 27-21-01-20 | IEC 61326-1, NE 21 | Declaration of Conformity | < 0.05 % of measuring range | 0.5 mm² | 4...20 mA | Output loop powered | Typical 2.5 V | Screw connection | Power supply optionally over the DIN mounting rail CH20M | -25 °C...70 °C | ≤± 0.07 µA x (Δ °C x V supply) @ Tamb < 25 °C, ≤±0.02 µA x (Δ °C x V supply) @ Tamb > 25 °C | - | - | KEMA10ATEX0183X | IECEXKEM10.0090X | Current source | 2-way isolator | ≤ 600 Ω (channel 1 +2), @ max 23mA | ≤ 5 ms | 300 Veff | 2 | 2.5 kVeff / 1 min. | 4...20 mA | 100 Hz | 30 mW per channel | 114.3 mm | 2.5 mm² | 4.5 inch | TS 35 | instruction sheet.pdf | DIN mounting rail, see Accessories | The passive isolator ACT20M-CI-CO-OLP-S isolates standard analogue current signals. An analogue input current signal is linearly converted into an analogue output current signal and galvanically isolated. Power is supplied through the output measurement circuit (output loop-powered). The passive isolator ACT20M-2CI-2CO-OLP-S offers the same functionality, but has two galvanically isolated channels.. | none | Standard signal isolating amplifier2-channel signal isolating amplifier in 6.1 mm width output-loop powered,for transmitting and isolating analogue DC current signals 0/4...20 mA.Add-on housing for TS35 rail mountingDimensions: L/W/H 114.3/ 6.1/ 112.5 mmScrew connection / Nominal cross-section 2.5 mm2Protection degree: IP 20 Input 0/4...20 mAOutput 0/4...20 mALoad resistance < 600 OhmTransmission error < 0,1 % v. E. Limit frequency 100 HzAuxiliary power 0/4...20 mA output current loop Power loss approx. 1.2 W Ambient temperature range -25 °C...+70 °C Isolation EN 61010-1, 2-way isolation up to 2.5 kV AC/DCTest voltage 2.5 kV input against output against auxiliary powerRated voltage 300 V AC/DC at overvoltage category II and pollution degree 2Approvals cULus, FM Div2, ATEX Zone2, DNV, GLType ACT20M-2CI-2CO-OLP-S | EPLAN | Typical 2.5 V | -25 °C...+70 °C | 40 °C / 93 % rel. humidity, no condensation | - | - | - | - | E337701.pdf | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| 10 | 1: ¥1,834.504 | 1 | Conform | 100 Hz | 97 g | ACT20M-2CI-2CO-ILP-S | EC002653 | 4032248970001 | 2 | * | EC002479 | 6.1 mm | 112.5 mm | 0.24 inch | 4.429 inch | Signal converter/insulator, dual channel, Input current loop feed, 2-way isolator, Loop powered, via 4...20 mA input | IEC 61010-1 | 27-21-01-20 | IEC 61326-1, NE 21 | Declaration of Conformity | < 0.1 % of measuring range | 0.5 mm² | 0...20 mA, 4...20 mA | Loop powered, via 4...20 mA input | 1.25 V + 0.015 Vout @25°C | Screw connection | Power supply optionally over the DIN mounting rail CH20M | -25 °C...70 °C | ≤ 0.01 % / °C | - | - | KEMA10ATEX0183X | IECEXKEM10.0090X | Current source | 2-way isolator | ≤ 600 Ω, @ max 23mA | ≤ 5 ms | 300 Veff | 2 | 2.5 kVeff | 0...20 mA, 4…20mA | 100 Hz | 30 mW per channel | 114.3 mm | 2.5 mm² | 4.5 inch | TS 35 | instruction sheet.pdf | DIN mounting rail, see Accessories | The ACT20M-CI-CO-ILP-S passive isolator isolates standard analogue current signals. An analogue input current signal is linearly converted to an analogue output current signal and is galvanically isolated. Power is supplied through the input measuring circuit (input loop-powered). The passive isolator ACT20M-2CI-2CO-ILP-S offers the same functionality, but has two galvanically isolated channels. | none | Standard signal passive isolator2-channel passive isolator in 6.1 mm width input-loop powered,for transmitting and isolating analogue DC current signals 0/4...20 mA.Add-on housing for TS35 rail mountingDimensions: L/W/H 114.3/ 6.1/ 112.5 mmScrew connection / Nominal cross-section 2.5 mm2Protection degree: IP 20 Input 0/4...20 mAOutput 0/4...20 mALoad resistance < 600 OhmTransmission error < 0,1 % v. E. Limit frequency 100 Hz Auxiliary power 0/4...20 mA input current loop Power loss approx. 1.3 W Ambient temperature range -25 °C...+70 °CIsolation EN 61010-1, 2-way isolation up to 2.5 kV AC/DCTest voltage 2.5 kV input against output against auxiliary powerRated voltage 300 V AC/DC at overvoltage category II and pollution degree 2Approvals cULus, FM Div2, ATEX Zone2, DNV, GLType ACT20M-2CI-2CO-ILP-S | EPLAN | <1.25 V | -25 °C...+70 °C | 40 °C / 93 % rel. humidity, no condensation | - | - | - | - | - | - | - | - | - | - | - | - | 699 Years | - | - | - | - | - | - | - | - |
Page 1 / 1
1