ONEIC.US

DAT71210 sensors,switches&relay Series

High-voltage reed relays with SPST-NO contacts, 12V DC, 2A capacity

The DAT71210 series from Sensata Technologies consists of high-voltage reed relays with single-pole single-throw normally open (SPST-NO) contacts, rated for 12V DC and 2A capacity. These relays are commonly used in power distribution panels, motor control centers, and other industrial applications where reliable switching of low-voltage circuits is required.

If you're working on any project that involves controlling low-voltage circuits in harsh environments, these relays can be a solid choice. They offer robustness against electromagnetic interference and are known for their long service life and low contact resistance, making them suitable for frequent switching operations. One thing worth noting is their ability to handle transient voltages without degradation, which is crucial in industrial settings where electrical noise can be prevalent. Engineers tend to reach for this when they need a reliable, compact solution for switching circuits without the complexity of solid-state relays.

Series Images (25)

Documents & Media

PDF Document
PDF Document
PDF Document
PDF Document
PDF Document
PDF Document

Frequently Asked Questions

Content generated by AI, for reference only
Loading...
03

DAT71210 sensors,switches&relay - Part List

12 parts in total

Mounting Type

Termination Style

Current - Switching

Weight

Other Names

RoHS

Isolation

Voltage - Supply

Switching Voltage

Contact Resistance

Contact Layout, Typical

Tariff No

Height

Terminal Type

Bus Connection

Mfr Part #Quantity AvailablePriceCategoryVoltage - SupplyMounting TypeSwitching VoltageCurrent - SwitchingContact Layout, TypicalStandard PackageRoHSCoil TypeCoil CurrentRelease TimeCoil ResistanceVgs(th) (Max) @ IdVce(on) (Max) @ Vge, IcContact Rating (Current)PackagingContact FormContact MaterialTermination StyleTypeRelay TypeCard StandardOperate TimeOperating TemperatureIsolationContact ResistanceTariff NoWeightOther NamesContact TypeSVHCVoltagePower - MaxIsolation TypeVoltage - CoreNumber of PolesCurrent Rating (Max)Must Operate VoltageMust Release VoltageCurrent - Max/ContactVoltage - Input (Min)Voltage - Supply (Min)Voltage - Switching DCVoltage - Supply (Vcc/Vdd)DepthWidthHeightLengthHeight (Max)Terminal TypeNumber of PositionsSeriesMechanical LifeSwitching CyclesMaterialBus ConnectionResistanceLoad - Max SwitchingInsulation ResistanceCurrent - On State (It (RMS)) (Max)Contact TerminationMust ReleaseMust Operate
DAT71210P
2
DAT71210P

RELAY REED SPST 2A 12V RELAY;10KV12VSPNOTUNGSTEN-SOLDERTURRETHVCONTACTCONNECTIONS Relays Reed Relays Contact Configuration: 1A SPST-NO Mounting: Base Mount Switching Current: 2 Amps Switching Voltage: 7000 Volts

Sensata Technologies Holding N.V.

0-12VDCChassis Mount7000VAC, 7000VDC - Max2 Amps1A SPST-NO20RoHS Compliant PartNon Latching80mA2ms150 Ohms1.25 VDC9 VDC2ATraySPST-NO (1 Form A)Tungsten (W)Solder TurretRelaysReedReed Relay3ms-20°C ~ 70°C10 kv250 ohms (100 ohms)--DAT71210P-NDTungsten--------------------------240 ohm10^9 operations10^10 ohms (10^13 ohns)3 A17 kv1.25 V9 V
DAT71210
9
DAT71210

RELAY REED SPST 2A 12V SPST-NO Reed Relay, 2A, 12V dc Reed Relays SPST-NO 2A 12VDC 150Ohm Thru-Hole RELAY, REED, PCB, 12V RELAY;REED;HIGHVOLTAGE;SPNO;10KV;12VCOIL;PCB Relays Reed Relays Contact Configuration: 1A SPST-NO Mounting: PC Board Switching Current: 2 Amps Switching Voltage: 7000 Volts Reed relay 12 VDC 150 Ohm, DAT71210, Cynergy3 Cynergy3 单极常开 簧片继电器, 2 A, 12V dc, 60 x 15.8 x 18.5mm

Sensata Technologies Holding N.V.

0-12VDCThrough Hole7000VAC, 7000VDC - Max:2ASPST-NO20CompliantNon Latching80mA2ms150 Ohms1.25 VDC9 VDC2ATraySPST-NO (1 Form A)Tungsten (W)PC Pin-Reed-3ms-20°C ~ 70°C-250 mΩ853649000.02983--:No SVHC (20-Jun-2013):9.0 V50 W17kV ac/dc:7kV:1:2A:9.0V:1.25V:2A:9V:9.0V7000V dc:7kV15.8mm:60mm18.5mm60mm:18.5mmThrough Hole:10:D1000000 (Electrical) cycles:1000000---------
DAT71210S
6
DAT71210S

RELAY REED SPST 2A 12V SPST-NO Reed Relay, 2A, 12V dc Reed Relays SPST-NO 2A 12VDC 150Ohm Panel Mount RELAY, REED, 12V, 1/4", SPADE DRY REED RELAY SPST-NO, 12VDC, 2A, SPADE RELAY;10KV12VSPNOTUNGSTEN-PCBMOUNT1/4SPADEHVCONNECTIONS Relays Reed Relays Contact Configuration: 1A SPST-NO Mounting: Base Mount Switching Current: 2 Amps Switching Voltage: 7000 Volts Reed relay 12 VDC 150 Ohm, DAT71210S, Cynergy3

Sensata Technologies Holding N.V.

0-12VDCChassis Mount7000VAC, 7000VDC - Max:2ASPST-NO20CompliantNon Latching80mA2ms150 Ohms1.25 VDC9 VDC2ATraySPST-NO (1 Form A)Tungsten (W)Quick Connect - 0.250" (6.3mm)-Reed-3ms-20°C ~ 70°C-250 mΩ853649000.03466725-1054-:No SVHC (20-Jun-2013):9.0 V50 W17kV ac/dc:7kV:1:2A:9.0V:1.25V:2A:9V:9.0V7000V dc:7kV15.8mm:60mm24.8mm60mm:18.5mmTab:10:D1000000 (Electrical) cycles:1000000---------
DAT71210F
8
DAT71210F

RELAY REED SPST 2A 12V RELAY; REED; HIGH VOLTAGE; SPNO; 10KV; 12V COIL; FLYING LEAD Reed Relays SPST-NO 2A 12VDC 150Ohm REED RELAY SPST-NO 12VDC 2A, FLYING LEAD RELAY;REED;HIGHVOLTAGE;SPNO;10KV;12VCOIL;FLYINGLEAD Relays Reed Relays Contact Configuration: 1A SPST-NO Mounting: Flying Leads Switching Current: 2 Amps Switching Voltage: 7000 Volts

Sensata Technologies Holding N.V.

0-12VDCThrough Hole7000VAC, 7000VDC - Max--20CompliantNon Latching80mA2ms150 Ohms1.25 VDC9 VDC2ATraySPST-NO (1 Form A)Tungsten (W)PC Pin, Wire Leads-Reed-3ms-20°C ~ 70°C--853641100.036-----------------------------------
DAT71210T
DAT71210T

RELAY REED HV 10KV N/O 12VDC PCB RELAY;10KV12VSPNOTUNGSTEN-PANELMOUNTSTUDSSOLDERTURRETCOIL/HVCONTACT Relays Reed Relays Contact Configuration: 1A SPST-NO Mounting: Base Mount Switching Current: 2 Amps Switching Voltage: -

Sensata Technologies Holding N.V.

0-12 VDCBase Mount-2 Amps1A SPST-NO-------------Relays-Reed Relay-------Tungsten---------------------------------
DAT71210F-HR
DAT71210F-HR

10KV 12V SPNO Tungsten - Flying Lead HVcontact connections - HR Relays Reed Relays Contact Configuration: 1A SPST-NO Mounting: PC Board Switching Current: 3 Amps Switching Voltage: 7000 Volts

Sensata Technologies Holding N.V.

0-12 VDCPC Board7000 Volts3 Amps1A SPST-NO-------------Relays-Reed Relay--10kV-----------------------------TungstenFlying Leads-------
DAT71210-HR
DAT71210-HR

10KV 12V SPNO Tungsten - PCB mount - HR Relays Reed Relays Contact Configuration: 1A SPST-NO Mounting: PC Board Switching Current: 3 Amps Switching Voltage: 7000 Volts

Sensata Technologies Holding N.V.

0-12 VDCPC Board7000 Volts3 Amps1A SPST-NO-------------Relays-Reed Relay--10kV-----------------------------TungstenPC Board-------
DAT71210U
DAT71210U

Reed Relay, Tungsten, SPST-NO, 12 VDC, DA Series, Through Hole, 150 ohm, 2 A

Sensata Technologies Holding N.V.

0---------------------------------------------------------------
DAT71210FU
DAT71210FU

Reed Relay, Tungsten, SPST-NO, 12 VDC, DA Series, Through Hole, 150 ohm, 2 A

Sensata Technologies Holding N.V.

0---------------------------------------------------------------
DAT71210PU
DAT71210PU

RELAY REED SPST-NO 2A 12V

Sensata Technologies Holding N.V.

0---------------------------------------------------------------
DAT71210SU
DAT71210SU

RELAY REED SPST-NO 2A 12V

Sensata Technologies Holding N.V.

0---------------------------------------------------------------
DAT71210TU
DAT71210TU

RELAY REED SPST-NO 2A 12V

Sensata Technologies Holding N.V.

0---------------------------------------------------------------
Page 1 / 1
1